We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
HNZXIB RE-501 5L rotary evaporator with chiller unit, glass condenser and water bath, stainless steel frame, silver finish

HNZXIB

HNZXIB RE-501 5L Rotary Evaporator with -20°C Chiller DLSB5/20 220V

SKU CH-HGCG-YJX0G MPN RE-501

A 5 L rotary evaporator with manual screw-rod lift, digital 0-120 r/min speed control and a circulating chiller that reaches -20 °C

  • Total capacity5000ml
  • Rated voltage220 V
  • Product typeRotary Evaporator
  • 5 L capacity for large-volume distillation
  • Digital speed control up to 120 r/min for precise evaporation
  • Manual screw-lift adjusts height 0-150 mm for easy flask handling
  • Integrated chiller cools to -20 °C for efficient solvent recovery
  • CE and ISO certified with PTFE and fluoro rubber sealing for vacuum integrity

5L Rotary Evaporator for Laboratory Distillation

The HNZXIB RE-501 is a 5000ml rotary evaporator designed for laboratory solvent distillation and concentration. It operates on 220V power and includes a DLSB5/20 circulating chiller capable of reaching -20°C. This combination suits labs requiring efficient evaporation and precise temperature control for heat-sensitive biological samples.

Hand-Wheel Lifting and Digital Speed Control

The bundled package pairs the RE-501 rotavap with a 5L refrigerated circulator, removing the need for separate cooling equipment. A 40W motor provides stepless speed regulation from 0 to 120 r/min with digital display. Manual screw-rod lifting offers 150mm of travel, while the 1500W water/oil bath maintains temperature accuracy within ±1°C.

5L Evaporating Flask Capacity Decides Suitability

The 5L evaporating flask and 3L receiving flask set the maximum batch volume for each run. An evaporation rate of 1 L/H for water defines throughput for aqueous solvents. Buyers needing larger single-batch processing or higher evaporation speeds will find this capacity limiting.

How it compares

Measured against everything we stock in Lab Equipment & Supplies, at today’s prices. Recalculated every night.

Price $2,490.99
Pricier than about 88% of the 734 comparable items (median $60.99).

Specifications

Product
Total capacity5000ml
Product typeRotary Evaporator
Power
Rated voltage220 V

Questions about this item

How often should the PTFE and fluoro rubber seals be checked or replaced on the RE-501?

Inspect the PTFE and fluoro rubber seals before each run; replace them if they show wear, cracking or loss of vacuum below 0.098 Mpa.

What limits continuous operation of the 1500 W water-oil bath on the RE-501?

The bath’s ±1 °C accuracy and 1500 W heater set the practical limit; prolonged runs at maximum temperature may trigger thermal protection.

How much heat and noise does the 40 W motor and DLSB5/20 chiller add during all-day runs?

The 40 W motor runs at 0-120 r/min with low noise, while the 5 L chiller removes heat to -20 °C, keeping the bench area cool.

More in Lab Equipment & Supplies

Similar items