We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
HNZXIB RE501 5L rotary evaporator with DLSB10/10 chiller on metal frame, glass flasks and condenser, stainless steel bath

HNZXIB

HNZXIB RE501 5L Rotary Evaporator with DLSB10/10 Chiller 220V/50Hz

SKU CH-ZGBB-ZJP73

A 5 L rotary evaporator with a 10 L chiller reaching −10 °C, digital speed control up to 120 r/min and a 1500 W bath for efficient solvent recovery

  • Total capacity5L
  • Rated voltage220 V
  • Product typeRotary Evaporator
  • High evaporation efficiency with 5 L evaporating flask
  • Precise digital speed control up to 120 r/min
  • ±1 °C bath temperature accuracy for sensitive samples
  • PTFE and fluoro rubber sealing resists corrosion
  • Includes DLSB10/10 chiller for -10 °C cooling

5 L Rotary Evaporator System

The HNZXIB RE501 is a 5 L rotary evaporator paired with a DLSB10/10 chiller operating at 220 V / 50 Hz. It serves laboratories that need efficient solvent distillation and recovery for heat-sensitive biological compounds. The package combines the evaporator and refrigerated circulator in one safety wooden crate.

Upgrade from Smaller Flask Units

This system replaces setups limited to smaller evaporating flasks when throughput must increase. The 5 L evaporating flask and 3 L receiving flask handle larger batch volumes, while the 1500 W water or oil bath and 0.098 Mpa vacuum degree accelerate evaporation. The jump is worth it when sample quantity exceeds the capacity of benchtop models.

Integration Into Laboratory Workflow

The unit requires a 220 V / 50 Hz supply and space for the 28 cm diameter by 17 cm deep bath. Manual screw-rod lifting provides 0–150 mm vertical travel for flask positioning. Digital speed control from 0–120 r/min and PTFE with fluoro rubber sealing simplify operation and maintenance. The chiller delivers -10 °C cooling capacity to condense solvent vapour efficiently.

How it compares

Measured against everything we stock in Lab Equipment & Supplies, at today’s prices. Recalculated every night.

Price $2,773.99
Pricier than about 90% of the 734 comparable items (median $60.99).

Specifications

Product
Total capacity5L
Product typeRotary Evaporator
Power
Rated voltage220 V

Questions about this item

What bench space and clearance does the RE501 need for the 28 cm bath and 150 mm lift?

The water bath measures 28 cm in diameter and the manual screw-rod lift travels 150 mm, so allow at least that footprint plus room for the 5 L evaporating flask and 3 L receiving flask.

Which step is most often missed when assembling the PTFE and fluoro-rubber seals on the double-backflow condenser?

Fit the PTFE and fluoro-rubber seals onto the condenser joints before tightening the glassware; skipping this causes vacuum leaks at the 0.098 Mpa rating.

How often should the high-borosilicate glassware and bath fluid be inspected or replaced?

Check the 5 L evaporating flask, 3 L receiving flask and condenser for cracks before each run; replace bath oil or water when it becomes contaminated or after prolonged heating at 1500 W.

More in Lab Equipment & Supplies

Similar items