Seagate BarraCuda ST1000DM010 1TB 7200 RPM 64MB SATA 6.0Gb/s 3.5" internal hard drive
- 1 TB
- SATA 6.0Gb/s
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 72 GB SAS 300 drive spinning at 10000 RPM in a hot-swappable 2.5" tray
The HP 384842-B21 is a 72 GB 2.5 inch SAS hard drive spinning at 10000 RPM. It is built for servers or workstations that need hot-swappable storage in a small form factor. The dual-port SAS 300 interface delivers up to 300 MBps external transfer rate. This drive suits IT teams replacing a failed drive in an existing HP array or expanding capacity in a compatible bay.
Verify that your chassis accepts 2.5 inch SAS drives and that the backplane or controller supports the SAS 300 interface. The drive requires a hot-swap tray and a dual-port SAS connection for full redundancy. Confirm the drive tray matches your enclosure; tray design varies by generation. Ensure your RAID or HBA firmware recognises 72 GB drives before installation.
At 10000 RPM the drive generates measurable heat and audible seek noise typical of enterprise spindles. Airflow across the 2.5 inch body is required to keep temperatures within specification. Power draw follows standard SAS 300 limits for this capacity class. Acoustic output is noticeable in quiet offices but normal for a rack environment.
Measured against everything we stock in 3.5-Inch Internal Desktop HDDs, at today’s prices. Recalculated every night.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | HP |
| Model name | 384842-B21 |
| Total capacity | 72 GB |
| Performance | |
| Rotational speed | 10,000 RPM |
| Ports & slots | |
| Interface type | SAS 300 |
| Size & build | |
| Form factor | 2.5 in (6.35 cm) |
| Shipping weight | 0.91 kg |
| Package size | 152 × 102 × 51 mm |
The supplier description states the drive includes a tray, so no separate tray purchase is required.
Both figures refer to the same drive; 72 GB is the standard marketed capacity while 72.8 GB reflects the formatted binary size.
It is the maximum external interface speed; actual throughput will be lower and limited by the 10000 RPM mechanical latency.
More in 3.5-Inch Internal Desktop HDDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?