We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

HP

HP 653122-B21 3.5" 100GB SATA enterprise SSD

SKU CH-RQKZ-8YPXE MPN 653122-B21

A 3.5" 100GB SATA enterprise SSD with MLC flash delivering up to 257 MBps read and 129 MBps write for server workloads

  • Total capacity100 GB
  • Sequential read speedUp to 257 MB/s
  • Sequential write speedUp to 129 MB/s
  • Interface typeSATA II
  • Form factor3.5 in (8.89 cm)
  • NAND flash typeMLC
  • Enterprise-grade reliability with MLC NAND flash technology
  • 5 inch form factor fits standard server drive bays
  • Hot-swap capable for zero-downtime drive replacement
  • Up to 257 MBps sequential read for fast data access
  • Up to 32,000 IOPS random read accelerates transactional workloads

HP 100 GB SATA II Enterprise SSD

The HP 653122-B21 is a 3.5-inch enterprise solid-state drive with a 100 GB capacity and a SATA II interface. It uses MLC NAND flash and fits a standard LFF hot-swap carrier for HP ProLiant servers. Sequential reads reach up to 257 MBps while writes reach up to 129 MBps. Random 4 KB performance delivers up to 32,000 read IOPS and 6,000 write IOPS.

Suited for read-heavy server workloads

This drive targets mainstream enterprise applications such as boot volumes, local caching or read-intensive databases where low latency and consistent random reads matter. The MLC endurance profile and 7 W idle power suit always-on server environments. Builders needing higher write endurance, larger capacities or a 6 Gbps SATA link should consider other options.

SATA II 3 Gbps interface

The drive connects through a SATA II port limited to 3 Gbps throughput, which caps maximum sequential transfer rates below modern SATA III speeds. Verify that your server backplane or controller supports this generation before installation.

How it compares

Measured against everything we stock in Server & Data Center SSDs, at today’s prices. Recalculated every night.

Price $385.99
Cheaper than about 79% of the 1,039 comparable items (median $992.99).
Total capacity 100 GB
Lower than about 99% of the 522 comparable items (median 3.2 TB).
Sequential read speed Up to 257 MB/s
Lower than about 98% of the 311 comparable items (median 6,500 MB/s).
Price per TB $3,859.90 per TB
Pricier than about 92% of the 522 comparable items (median $595.64 per TB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameHP
Model name653122-B21
Total capacity100 GB
Performance
Sequential read speedUp to 257 MB/s
Sequential write speedUp to 129 MB/s
Random read (4K)Up to 32,000 IOPS
Random write (4K)Up to 6,000 IOPS
Storage
NAND flash typeMLC
Ports & slots
Interface typeSATA II
Power
Idle power draw7 W
Size & build
Form factor3.5 in (8.89 cm)
Overall height15 mm
Shipping weight1.36 kg
Package size279 × 229 × 152 mm
Environment & compliance
Operating temperature range0 °C to 60 °C

Questions about this item

How much power does the 653122-B21 draw at idle and what is its operating temperature range?

The drive idles at 7W and is rated for 0°C to 60°C, so it stays cool and quiet inside a server chassis all day.

Does this 3.5-inch SATA II SSD need a hot-swap bay or a specific carrier to install in my ProLiant?

It ships with an HP SmartDrive carrier and fits a standard 3.5-inch hot-swap LFF bay; no extra caddy or adapter is required.

Will the SATA II interface on this 100GB MLC drive bottleneck my older RAID controller?

The 3Gb/s SATA II link caps sequential throughput at 257 MB/s read and 129 MB/s write, which matches legacy controllers without wasting their bandwidth.

More in Server & Data Center SSDs

Similar items