HP ProLiant DL160 Gen9 1U rack server 2× E5-2623v3 32GB DDR4 2× 500GB SATA B140i
- 1U
- Rack
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
1U rack server with dual 10-core Xeon CPUs, 8 GB DDR4, and two 500 GB SATA drives on B140i RAID
Installed Memory Size 8GB
HDD 2 x 500GB
The HP ProLiant DL160 G9 is a 1U rack server fitted with two Xeon E5-2650 v3 ten-core processors running at 2.3 GHz. It ships with 8 GB of DDR4 memory and two 500 GB 7.2K SATA drives managed by a B140i software RAID controller supporting levels 0, 1 and 5. Redundant hot-swap 550 W power supplies are included.
This configuration fits environments that need dual-socket compute in a single rack unit with basic SATA storage redundancy. Buyers who require the full 1 TB memory ceiling or SAS drive support should look at a different configuration, because the installed 8 GB uses only a fraction of the 16 DIMM slots and the B140i controller handles SATA media only.
The storage controller provides RAID 0, 1 and 5 for SATA drives and does not support SAS or other interfaces. This single specification decides whether the server matches the storage architecture you plan to deploy.
Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.
New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | HP |
| Product line | ProLiant |
| Model name | Proliant DL160 G9 |
| Product type | Rack |
| Processor | |
| Processor | Intel Xeon E5 v3 |
| Chipset | Intel C610 |
| Max supported CPUs | 2 |
| Memory | |
| Installed RAM | 8 GB |
| Type of memory | DDR4 |
| Maximum RAM capacity | 8 GB |
| Memory slot count | 16 |
| Storage | |
| Installed SSD | No |
| Disk controller | B140i Software RAID |
| Drive interface | SATA |
| Supported RAID levels | 0,1,5 |
| Optical drive | None |
| Graphics | |
| Video RAM | 16 MB |
| Graphics chip | Matrox G200 |
| Ports & slots | |
| Network ports | 2 x Ports |
| Power | |
| Hot-swap redundant PSU | Yes |
| Size & build | |
| Rack height | 1U |
| Product weight | 63 lb (28.6 kg) |
| Software | |
| Operating system | No |
| More details | |
| Management controller | iLO Management (standard). |
Other versions of this model
Eight of the sixteen DDR4 slots are already populated, leaving eight open slots for future expansion.
The B140i software RAID and the 6 Gbps SATA interface cap sustained throughput well below the 12 Gbps SAS ceiling.
Dual 550 W hot-swap supplies share the load, keeping fan speeds moderate; typical idle noise stays under 50 dBA and inlet temperature remains within ASHRAE A2 limits.
More in Rack & Tower Servers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?