HP ProLiant DL160 Gen9 1U rack server E5-2630 v3 2.4GHz 16GB DDR4 2x 500GB SATA B140i
- 1U
- Rack
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
1U rack server with Intel Xeon E5-2623 v3, 4GB DDR4, and dual 1TB SATA drives
Installed Memory Size 4GB
HDD 2 x 1TB
The HP ProLiant DL160 Gen9 fits in a single rack unit and ships with one Xeon E5-2623 v3 quad-core processor at 3 GHz, 4 GB of DDR4 memory and two 1 TB 7.2K 2.5-inch SATA drives on the B140i software RAID controller. Redundant hot-swap 550 W power supplies are included.
Organisations that require dual-processor performance, larger installed memory, hardware RAID or SAS drives should consider other platforms. The eight SFF bays and 16 DIMM slots allow future expansion within the same chassis.
The onboard controller supports RAID 0, 1 and 5 only on SATA media; it cannot manage SAS or other interfaces. Buyers needing hardware RAID or mixed drive types must add a compatible controller card.
Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.
New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | HP |
| Product line | ProLiant |
| Model name | Proliant DL160 G9 |
| Product type | Rack |
| Processor | |
| Processor | Intel Xeon E5 v3 |
| Chipset | Intel C610 |
| Max supported CPUs | 2 |
| Memory | |
| Installed RAM | 4 GB |
| Type of memory | DDR4 |
| Maximum RAM capacity | 4 GB |
| Memory slot count | 16 |
| Storage | |
| Installed SSD | No |
| Disk controller | B140i Software RAID |
| Drive interface | SATA |
| Supported RAID levels | 0,1,5 |
| Optical drive | None |
| Graphics | |
| Video RAM | 16 MB |
| Graphics chip | Matrox G200 |
| Ports & slots | |
| Network ports | 2 x Ports |
| Power | |
| Hot-swap redundant PSU | Yes |
| Size & build | |
| Rack height | 1U |
| Product weight | 63 lb (28.6 kg) |
| Software | |
| Operating system | No |
| More details | |
| Management controller | iLO Management (standard). |
Other versions of this model
The server has 16 DDR4 slots in total; with 4 GB already installed, the remaining slots are available for ECC registered modules up to 64 GB each.
The B140i software RAID is restricted to the SATA 6 Gbps link speed of the installed 7.2 K rpm drives, so that interface becomes the bottleneck.
Dual 550 W hot-swap supplies share the load, keeping fan speeds moderate; typical idle noise stays below 40 dB and exhaust temperatures remain within ASHRAE A2 limits.
More in Rack & Tower Servers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?