HP ProLiant DL160 Gen9 1U rack server Xeon E5-2650 v3 10-core 2.3GHz 8GB DDR4 B140i 8 SFF
- 1U
- Rack
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
1U rack server with Xeon E5-2603v3 six-core 1.6GHz, 16GB DDR4, B140i SATA RAID and eight 2.5-inch bays
Installed Memory Size 16GB
HDD None
The HP ProLiant DL160 Gen9 fits a single Intel Xeon E5-2603 v3 six-core processor at 1.6 GHz with 16 GB of DDR4 memory installed across 16 DIMM slots. Redundant hot-swap power supplies and eight 2.5-inch drive bays support SATA RAID 0, 1 or 5 through the B140i controller. Matrox G200 graphics provide basic video output.
This chassis targets environments that run one processor and rely on SATA drives for capacity or boot volumes. The B140i controller does not support SAS disks, so workloads requiring hardware RAID or SAS connectivity should look elsewhere. Dual-socket configurations are possible but require a second processor kit not included here.
The eight small-form-factor bays accept 2.5-inch SATA drives managed by the B140i software RAID engine limited to RAID 0, 1 and 5. No SAS or hardware RAID capability is present, making this the deciding specification for storage planning.
Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.
New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | HP |
| Product line | ProLiant |
| Model name | Proliant DL160 G9 |
| Product type | Rack |
| Processor | |
| Processor | Intel Xeon E5 v3 |
| Chipset | Intel C610 |
| Max supported CPUs | 2 |
| Memory | |
| Installed RAM | 16 GB |
| Type of memory | DDR4 |
| Maximum RAM capacity | 16 GB |
| Memory slot count | 16 |
| Storage | |
| Installed SSD | No |
| Disk controller | B140i Software RAID |
| Supported RAID levels | 0,1,5 |
| Optical drive | None |
| Graphics | |
| Video RAM | 16 MB |
| Graphics chip | Matrox G200 |
| Ports & slots | |
| Network ports | 2 x Ports |
| Power | |
| Hot-swap redundant PSU | Yes |
| Size & build | |
| Rack height | 1U |
| Product weight | 63 lb (28.6 kg) |
| Software | |
| Operating system | No |
| More details | |
| Management controller | iLO Management (standard). |
Other versions of this model
The chassis holds eight 2.5-inch SFF bays and the B140i controller supports SATA only, so you need SATA SSDs or HDDs; SAS drives are not supported by this controller.
The board accepts two processors and provides eight DDR4 DIMM slots per CPU; adding the second processor simply unlocks the second bank of eight slots while the existing 16 GB remains in the first bank.
Attach a monitor to the VGA port and confirm the Matrox G200 16 MB adapter appears in BIOS or OS device manager, then connect network cables and check both 361 Ethernet links show 1 Gb/s.
More in Rack & Tower Servers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?