HP ProLiant DL160 Gen9 1U rack server E5-2623 v3 64GB 2×146GB SAS H240
- 1U
- Rack
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
1U rack server with Xeon E5-2603v3, 64GB DDR4, B140i SATA RAID and eight 2.5-inch drive bays
Installed Memory Size 64GB
HDD None
The HP ProLiant DL160 Gen9 is a 1U rack server built for general-purpose workloads. It ships with a single Intel Xeon E5-2603v3 six-core processor running at 1.6GHz and 64GB of DDR4 ECC registered memory. The B140i software RAID controller supports SATA drives in RAID 0, 1, and 5 configurations.
This system fits environments that need a compact rack footprint with redundant hot-swap power and embedded dual-port 1Gb Ethernet. It suits buyers who plan to populate the eight 2.5-inch SFF bays with SATA media and do not require hardware RAID acceleration. Builders who need hardware RAID, SAS connectivity, or more than one processor installed should look at other configurations.
Although the platform supports up to 1TB across 16 DIMM slots when fully populated with two processors, this unit arrives with 64GB installed and the maximum capacity for the current single-processor configuration is 64GB. Adding memory beyond that limit requires installing the second processor.
Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.
New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | HP |
| Product line | ProLiant |
| Model name | Proliant DL160 G9 |
| Product type | Rack |
| Processor | |
| Processor | Intel Xeon E5 v3 |
| Chipset | Intel C610 |
| Max supported CPUs | 2 |
| Memory | |
| Installed RAM | 64 GB |
| Type of memory | DDR4 |
| Maximum RAM capacity | 64 GB |
| Memory slot count | 16 |
| Storage | |
| Installed SSD | No |
| Disk controller | B140i Software RAID |
| Supported RAID levels | 0,1,5 |
| Optical drive | None |
| Graphics | |
| Video RAM | 16 MB |
| Graphics chip | Matrox G200 |
| Ports & slots | |
| Network ports | 2 x Ports |
| Power | |
| Hot-swap redundant PSU | Yes |
| Size & build | |
| Rack height | 1U |
| Product weight | 63 lb (28.6 kg) |
| Software | |
| Operating system | No |
| More details | |
| Management controller | iLO Management (standard). |
Other versions of this model
The 550 W power supply sets the ceiling; sustained full-load operation will hit its thermal limit before the CPU or memory do.
Redundant hot-swap fans keep the 1U enclosure within spec, but expect noticeable airflow noise and warm exhaust after hours of continuous load.
You need 2.5-inch SATA drives and matching HP SFF drive trays; the B140i supports RAID 0, 1, 5 on SATA only and the server ships with no drives installed.
More in Rack & Tower Servers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?