We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 1U rack server front panel with eight 2.5-inch drive bays

HP

HP ProLiant DL160 Gen9 1U rack server E5-2650 v3 10-core 2.3 GHz 64 GB DDR4 2×1 TB SATA B140i

SKU CH-NDDZ-19J6J

1U rack server with a 10-core Xeon at 2.3 GHz, 64 GB DDR4, and two 1 TB SATA drives on a B140i controller

  • ProcessorIntel Xeon E5 v3
  • Installed RAM64 GB
  • Video RAM16 MB
  • Installed SSDNo
  • ChipsetIntel C610
  • Type of memoryDDR4

Installed Memory Size 64GB

HDD 2 x 1TB

  • 10-core Xeon delivers 20 threads for parallel workloads
  • 64 GB DDR4 ECC memory fills all 16 slots at 2400 MT/s
  • Dual 1 TB 7.2K SATA drives provide mirrored storage
  • B140i controller supports RAID 0 1 5 for data protection
  • Redundant 550 W hot-swap power supplies maintain uptime

Balanced 1U rack server for general workloads

The HP ProLiant DL160 Gen9 fits a single Intel Xeon E5-2650 v3 processor with ten cores at 2.3 GHz and 64 GB of DDR4 memory. Eight small-form-factor drive bays support SATA storage, while the B140i controller provides software RAID levels 0, 1 and 5. Redundant hot-swap power supplies keep the platform running during module replacement.

Sustained performance

Under continuous load the ten-core Xeon maintains its 2.3 GHz base frequency across all threads, and hyper-threading presents twenty logical processors to the operating system. DDR4 ECC registered modules operate at speeds the processor supports, up to 2400 MT/s, correcting single-bit errors without interrupting long-running jobs. The 550 W redundant supply delivers stable power for extended compute or storage tasks.

Compact chassis with front-access drive bays

The 1U enclosure holds eight 2.5-inch SATA drives behind a tool-less front panel, allowing quick swap without removing the server from the rack. A Matrox G200 graphics chip provides basic video output for local console access. Two processors can be installed in the dual-socket board, doubling core count and memory channels when the workload grows.

How it compares

Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.

Price $690.99
Cheaper than about 87% of the 17,641 comparable items (median $1,910.99).
Installed RAM 64 GB
Lower than about 70% of the 15,103 comparable items (median 128 GB).
Video RAM 16 MB
Higher than about 80% of the 8,309 comparable items (median 0.01 GB).

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameHP
Product lineProLiant
Model nameProliant DL160 G9
Product typeRack
Processor
ProcessorIntel Xeon E5 v3
ChipsetIntel C610
Max supported CPUs2
Memory
Installed RAM64 GB
Type of memoryDDR4
Maximum RAM capacity64 GB
Memory slot count16
Storage
Installed SSDNo
Disk controllerB140i Software RAID
Drive interfaceSATA
Supported RAID levels0,1,5
Optical driveNone
Graphics
Video RAM16 MB
Graphics chipMatrox G200
Ports & slots
Network ports2 x Ports
Power
Hot-swap redundant PSUYes
Size & build
Rack height1U
Product weight63 lb (28.6 kg)
Software
Operating systemNo
More details
Management controlleriLO Management (standard).

Other versions of this model

5 more in the same range

Questions about this item

How much power does the 550 W supply draw when the server runs at full load all day?

The unit ships with a 550 W hot-swap supply; actual draw depends on workload and a second CPU if added.

Which rails or brackets are needed to mount this 1U chassis in a standard rack?

The 1U rack chassis requires compatible sliding rails or fixed brackets, which are not included.

Will the B140i controller recognise the existing 2.5″ SATA drives if I add a hardware RAID card later?

The B140i manages the two 1 TB 7.2 K SATA drives; a supported hardware RAID controller can take over the same backplane.

More in Rack & Tower Servers

Similar items