We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 1U rack server with eight front drive bays and dual power supplies

HP

HP ProLiant DL360 Gen9 1U Rack Server E5-2643 v3 3.4GHz 8GB DDR4 B140i 8 SFF

SKU CH-9D80-QA4F4

A 1U rack server with a 3.4 GHz Xeon E5-2643 v3 six-core processor, 8GB DDR4 memory, B140i SATA RAID controller, eight 2.5-inch drive bays and dual 500W redundant power supplies

  • ProcessorIntel Xeon E5 v3
  • Installed RAM8 GB
  • Video RAM16 MB
  • Installed SSDNo
  • ChipsetIntel C610
  • Type of memoryDDR4
  • Six-core Xeon at 3.4 GHz for high single-thread speed
  • Eight small-form-factor bays fit dense storage in 1U
  • Dual 500 W hot-swap supplies keep the server running
  • 24 DDR4 slots allow up to 3 TB memory growth
  • B140i controller provides RAID 0, 1, 5, 10 on SATA drives

Dense 1U Rack Server

The HP ProLiant DL360 Gen9 is a single-socket 1U rack server built around an Intel Xeon E5-2643 v3 six-core processor running at 3.4GHz. It ships with 8GB of DDR4 ECC registered memory and a B140i software RAID controller that supports SATA drives in RAID 0, 1, 5 and 10. Dual 500W redundant hot-swap power supplies provide resilience for continuous operation in space-constrained data centres.

Suited for SATA-Only Workloads

This configuration suits buyers who need a compact rack server for SATA-based storage arrays, virtualisation hosts or general-purpose compute where software RAID is acceptable. The 24 DIMM slots allow memory expansion up to 3TB when a second processor is added, supporting 2400MT/s DDR4 modules. Buyers who require hardware RAID acceleration or SAS drive support should look at models equipped with a dedicated Smart Array controller.

B140i SATA Software RAID Controller

The installed B140i controller provides RAID 0, 1, 5 and 10 for SATA drives only and does not support SAS or hardware RAID acceleration. Eight 2.5-inch SFF drive bays are available with two drive trays and screws included, while the Matrox G200 graphics chip supplies 16MB of video memory for basic console output. No operating system is included.

How it compares

Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.

Price $774.99
Cheaper than about 83% of the 17,641 comparable items (median $1,910.99).
Installed RAM 8 GB
Lower than about 95% of the 15,103 comparable items (median 128 GB).
Video RAM 16 MB
Higher than about 80% of the 8,309 comparable items (median 0.01 GB).

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameHP
Product lineProLiant
Model nameProliant DL360 G9
Product typeRack
Processor
ProcessorIntel Xeon E5 v3
ChipsetIntel C610
Max supported CPUs2
Memory
Installed RAM8 GB
Type of memoryDDR4
Maximum RAM capacity8 GB
Memory slot count24
Storage
Installed SSDNo
Disk controllerB140i Software RAID
Supported RAID levelsRAID 0/1/5/10
Optical driveNone
Graphics
Video RAM16 MB
Graphics chipMatrox G200
Ports & slots
Network ports4 x Ports
Power
Hot-swap redundant PSUYes
Size & build
Rack height1U
Product weight63 lb (28.6 kg)
Software
Operating systemNo
More details
Management controlleriLO Management (standard).

Other versions of this model

5 more in the same range

Questions about this item

Should I pick the single E5-2643 v3 or add a second processor?

The board supports two processors; a second E5-2643 v3 would double cores to 12 physical and 24 virtual, but the single 3.4 GHz six-core unit already handles many workloads.

What does the 3.4 GHz clock deliver once the server is running?

The 3.4 GHz base frequency gives strong single-thread response for database and virtualization tasks, with 12 virtual threads available through hyper-threading on the installed chip.

Does the B140i controller limit me to SATA drives or can I use SAS?

The B140i is a SATA-only software RAID controller; it supports RAID 0, 1, 5 and 10 on SATA disks, while the backplane can accept 12 Gb/s SAS drives if a dedicated SAS RAID card is added.

More in Rack & Tower Servers

Similar items