We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

HP

HP ProLiant DL360 Gen9 1U Rack Server E5-2643v3 3.4GHz 96GB DDR4 B140i 8 SFF

SKU CH-N863-04YYB

1U rack server with single Xeon E5-2643v3 3.4 GHz six-core CPU, 96 GB DDR4, B140i SATA RAID and eight 2.5-inch drive bays

  • ProcessorIntel Xeon E5 v3
  • Installed RAM96 GB
  • Video RAM16 MB
  • Installed SSDNo
  • ChipsetIntel C610
  • Type of memoryDDR4
  • Six-core Xeon at 3.4 GHz for high single-thread speed
  • 96 GB DDR4 ECC memory fills all 24 DIMM slots
  • Dual 500 W hot-swap power supplies keep the server running if one fails
  • B140i controller provides RAID 0, 1, 5 and 10 on SATA drives
  • 1U rack form factor packs eight 2.5-inch drive bays into minimal space

1U Rack Server with Xeon E5-2643v3

The HP ProLiant DL360 Gen9 is a 1U rack server built for dense compute environments. It ships with a single Intel Xeon E5-2643v3 six-core processor running at 3.4GHz and 96GB of DDR4 ECC registered memory across 24 DIMM slots. The chassis supports a second processor for up to 12 total cores and 3TB maximum memory capacity. Eight 2.5-inch SFF drive bays provide internal storage flexibility for virtualisation or database workloads.

Sustained Load Behaviour with Redundant Power

Dual 500W hot-swap redundant power supplies maintain operation during a single unit failure, supporting continuous uptime. The B140i software RAID controller manages SATA drives in RAID 0, 1, 5 or 10 configurations without a dedicated hardware cache. Memory runs at speeds up to 2400MT/s dependent on the installed processor capability, delivering consistent throughput for memory-intensive applications. Hyper-threading presents 12 logical threads for parallel task execution.

Thermals and Power Draw in Normal Use

The 1U form factor uses high-speed internal fans to move air across the CPU, memory and power supply zones. Redundant 500W supplies share the load, reducing per-unit stress and heat output during typical operation. Fan speeds adjust dynamically based on inlet temperature readings from onboard sensors. The Matrox G200 graphics core with 16MB video memory draws minimal power for basic management console output.

How it compares

Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.

Price $715.99
Cheaper than about 86% of the 17,641 comparable items (median $1,910.99).
Installed RAM 96 GB
Lower than about 60% of the 15,103 comparable items (median 128 GB).
Video RAM 16 MB
Higher than about 80% of the 8,309 comparable items (median 0.01 GB).

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameHP
Product lineProLiant
Model nameProliant DL360 G9
Product typeRack
Processor
ProcessorIntel Xeon E5 v3
ChipsetIntel C610
Max supported CPUs2
Memory
Installed RAM96 GB
Type of memoryDDR4
Maximum RAM capacity96 GB
Memory slot count24
Storage
Installed SSDNo
Disk controllerB140i Software RAID
Supported RAID levelsRAID 0/1/5/10
Optical driveNone
Graphics
Video RAM16 MB
Graphics chipMatrox G200
Ports & slots
Network ports4 x Ports
Power
Hot-swap redundant PSUYes
Size & build
Rack height1U
Product weight63 lb (28.6 kg)
Software
Operating systemNo
More details
Management controlleriLO Management (standard).

Questions about this item

How much power do the two 500W redundant supplies draw when the Xeon E5-2643v3 runs at 3.4GHz all day?

Each supply is rated at 500W; the server uses two in a redundant configuration so the total available power remains 500W while the second unit provides failover.

Which drives must I supply myself because the B140i controller only supports SATA?

The B140i software RAID handles SATA drives only, so you need to provide 2.5-inch SATA SSDs or HDDs for the eight SFF bays.

Can I keep my existing DDR4 ECC registered modules and add them to the 24 slots alongside the 96GB already installed?

The 24 DIMM slots accept 4GB, 8GB, 16GB, 32GB or 64GB DDR4 ECC registered modules up to 2400MT/s; the installed 96GB fills part of the capacity and you can populate the remaining slots with matching modules.

More in Rack & Tower Servers

Similar items