We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 1U rackmount switch with 24 RJ45 ports and four SFP+ slots

HPE Juniper Networking

HPE Juniper Networking EX4000-24T 24-port network switch

SKU CH-TBZY-8JSTK MPN EX4000-24T

A managed Layer 3 switch with 24 RJ45 ports at 10/100/1000BaseT and four 1G/10G SFP+ uplinks for flexible aggregation

  • Management typeManaged
  • Main ports24 x RJ45 + 4 x SFP+
  • Security featuresMedia Access Control (MAC) limiting (per port and per VLAN)
  • Quality of serviceL2 QoS L3 QoS Ingress policing: 1 rate 2 color Hardware queu
  • Layer support3
  • Layer 2 functionsLayer 2 switching Maximum MAC addresses per system: 32,000 J
  • 24 RJ45 ports provide high-density copper connectivity
  • 4 SFP+ uplinks enable 1G or 10G fibre links
  • Layer 3 routing supports 1,000 IPv4 prefixes and 7,800 host routes
  • 12 hardware queues per port deliver granular QoS control
  • 43 W max power draw without PoE reduces energy cost

24-Port Managed Switch with 4 SFP+ Uplinks

The HPE Juniper Networking EX4000-24T is a fixed-configuration Layer 3 managed switch. It provides 24 RJ45 ports running at 10/100/1000 Mbps and four 1G/10G SFP+ uplink ports. The unit operates without PoE and draws a maximum of 43 W. Cloud-native management is available through Juniper Mist Wired Assurance.

Suits managed access deployments.

This switch fits branch offices or campus access layers that require full Layer 2 and Layer 3 feature sets in a 1 U form factor. It supports 1,020 active VLANs, 253 Virtual Spanning Tree instances and 9,216-byte jumbo frames. Buyers needing Power over Ethernet for phones or cameras must select a PoE model. Environments requiring higher port density or 25 Gbps uplinks should consider other platforms.

24 RJ45 ports and four SFP+ uplinks define

The port combination of 24 copper interfaces plus four SFP+ cages determines whether the switch matches your cabling plan. Copper ports auto-negotiate to 10, 100 or 1,000 Mbps. Uplink cages accept 1 Gbps or 10 Gbps transceivers, which are sold separately. Verify that the 1,000 IPv4 unicast route limit and 4,000 ARP entry capacity meet your routing table requirements.

How it compares

Measured against everything we stock in Ethernet & PoE Switches, at today’s prices. Recalculated every night.

Price $1,534.99
Pricier than about 73% of the 2,759 comparable items (median $482.99).

Specifications

Product
Brand nameJuniper Networks, Inc.
Product lineEX4000
Model nameEX4000-24T
Part numberEX4000-24T
Connectivity
Management typeManaged
Layer support3
Ports & slots
Main ports24 x RJ45 + 4 x SFP+
Power
Max power drawWithout PoE: 43 W
Size & build
Product dimensions17.36 × 1.71 × 8.42 in (44.1 × 4.34 × 21.4 cm)
Product weight2.89 Kg
Shipping weight5.47 kg
Package size549 × 389 × 142 mm

Questions about this item

How do I mount the EX4000-24T in a rack and which orientation step is often missed?

Use the included brackets to secure the 44.10 cm wide chassis into a standard rack; the step people skip is verifying front-to-rear airflow clearance so the 43 W heat load exhausts cleanly.

What component will need replacement first and what is its rated limit?

The internal fan assembly is the only moving part; plan replacement once bearing noise appears, typically after several years of continuous 43 W operation.

Which capacity ceiling hits first under sustained Layer 3 traffic?

The IPv4 unicast route table caps at 1,000 prefixes in hardware, so that limit arrives before the 32,000 MAC table or 4,000 ARP entries fill.

More in Ethernet & PoE Switches

Similar items