Seagate BarraCuda ST8000DM004 8TB 5400 RPM 256MB SATA 3.5" internal hard drive
- 8 TB
- SATA 6.0Gb/s
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 600 GB 2.5 inch internal hard drive spinning at 10000 rpm with a SAS interface for HP 3PAR StoreServ 8000 storage systems
The HPE K2P99A is a 600 GB SAS hard drive built for the 3PAR StoreServ 8000 storage system. Its 2.5 inch form factor fits small form factor bays in enterprise arrays. The 10000 rpm spindle speed supports demanding random I/O workloads. This drive targets administrators expanding capacity in compatible HPE environments.
A 10000 rpm mechanism generates measurable heat under sustained load; adequate chassis airflow is required to maintain safe operating temperatures. Acoustic output is typical for enterprise 10K drives and audible in quiet rooms. Power draw rises during seek intensive operations but remains within standard SAS device limits. No active cooling or special power budget is specified by the manufacturer.
The drive uses a standard SAS connector for direct backplane attachment in supported enclosures. Physical dimensions are 5 inch height, 7 inch width and 10.5 inch depth with a weight of 6.26 lb. Compatibility is limited to the HP 3PAR StoreServ 8000 platform; it will not function in generic desktop or laptop systems. Retail or OEM packing may vary.
Measured against everything we stock in 3.5-Inch Internal Desktop HDDs, at today’s prices. Recalculated every night.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | HPE |
Slide the 2.5" drive into the correct SFF bay until the SAS connector seats firmly; the step often missed is verifying the carrier latch clicks fully locked so the drive cannot shift during vibration.
The mechanical spindle and actuator are the only wear items; plan to replace the drive once SMART reallocated-sector counts rise or after the rated annualised failure rate window for 10K SAS drives passes.
The 10000 rpm spindle caps sustained throughput at the SAS 12 Gbit/s interface ceiling, so sequential write speed plateaus before the controller or cache becomes the bottleneck.
More in 3.5-Inch Internal Desktop HDDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?