Hubbell Incorporated HBL3032 toggle switch brown 30A 120/277V
Double-pole toggle switch rated 30 A at 120/277 V AC with screw terminals for 14-10 AWG wire
- Color familyBrown
- Color and finishBrown
- Product typeLight Switch
- 30 A rating handles heavy loads
- 120/277 V AC dual-voltage compatibility
- Double-pole toggle controls two circuits
- Back and side wiring with 14–10 AWG range
- UL Listed, shatter-resistant and impact-resistant
Hubbell HBL3032 Toggle Switch
This Hubbell HBL3032 is a brown toggle switch rated for 30 A at 120/277 V AC. It uses a maintained double-pole mechanism for controlling lighting or motor loads. The screw-terminal design accepts wire from 14 AWG to 10 AWG. It suits commercial and industrial wiring jobs that require a durable single-gang device.
Thermals Noise and Power Draw
As a passive mechanical switch it generates no audible noise and draws no standby power. The shatter-resistant body and impact-resistant construction handle normal thermal cycling in wall boxes. Large brass binding-head screws with deep slots ensure secure connections that resist loosening over time. A molded strip gauge aids accurate wire preparation for reliable terminations.
30 A Double-Pole Rating
The 30 A, 120/277 V AC double-pole rating is the single specification that determines suitability for a circuit. It supports loads up to 2 hp at the rated voltages. Buyers needing a lower amperage or single-pole switch should select a different model. The UL Listing confirms compliance with applicable safety standards for this rating.
How it compares
Measured against everything we stock in Electrical Switches & Dimmers, at today’s prices. Recalculated every night.
- Price $38.99
- Typical for this category: the median of 791 items is $39.99.
Specifications
| Product | |
|---|---|
| Brand name | Hubbell Wiring Device-Kellems |
| Color and finish | Brown |
| Color family | Brown |
| Product type | Light Switch |
Questions about this item
How do I install the HBL3032 toggle switch and what step do people often miss?
Turn off power, connect 14 to 10 AWG wires to the brass screw terminals using back or side wiring, then verify the strip gauge for correct insulation length before restoring power.
What maintenance or replacement will the HBL3032 need over time?
The shatter‑resistant toggle and screw terminals require no routine maintenance; replace the switch only if the mechanism fails to hold position or shows heat damage.
What limit appears first when the HBL3032 runs continuously at full load?
The 30 A, 120/277 V AC rating and 2 hp motor limit define the maximum continuous load; exceeding either will trip the upstream breaker first.
More in Electrical Switches & Dimmers
Similar items
Hubbell Incorporated HBL1557 3-Position Toggle Switch 120/277V 20A Brown
- Brown
- Brown
Leviton Manufacturing Co. 052-10097-008 pull chain switch
Hubbell Incorporated HBL8200ILI 15A 125V Duplex Receptacle Ivory
- Ivory
- Wiring Devices
Hubbell HBL1203IL Illuminated Toggle Dimmer Switch 3-Way 15A Ivory
- Ivory
- Ivory





