Hubbell Incorporated IEC Pin and Sleeve Receptacle 60A 208V HBL560R9W
Watertight IEC pin-and-sleeve receptacle rated 60 A at 208 V with IP67 protection and a spring-loaded cap
- Color familyBlue
- Color and finishBlue
- Product typeLight Switch
- Watertight IP67 enclosure protects against dust and water ingress
- 60 A current rating supports heavy-duty industrial loads
- 120/208 V AC voltage rating suits three-phase power systems
- Spring-loaded cap maintains seal when receptacle is not in use
- Thermoplastic housing resists impact and chemical exposure
60 A 120/208 V IEC Pin and Sleeve Receptacle
This 60 A IEC pin and sleeve receptacle is rated for 120/208 V AC single-phase power and carries a 15 hp motor rating. It suits industrial facilities that need a watertight connection for heavy-duty equipment. The blue thermoplastic housing provides corrosion resistance in harsh environments.
IP67 and NEMA 4X Watertight Construction
The flanged body meets IP67 and NEMA 4X ratings, so the receptacle withstands wash-downs and outdoor exposure. A spring-loaded cap seals the face when the plug is removed, maintaining the ingress protection. The straight orientation and 4.15 in face diameter simplify panel layout.
Verify 1/0 AWG Maximum Wire and 60 A Circuit
Confirm that your installation can accommodate conductors up to 1/0 AWG and that the branch circuit is protected at 60 A. The receptacle provides two poles, three wires and a grounded IEC configuration. Ensure the mounting surface accepts a single-gang flanged device.
How it compares
Measured against everything we stock in Electrical Switches & Dimmers, at today’s prices. Recalculated every night.
- Price $435.99
- Pricier than about 92% of the 791 comparable items (median $39.99).
Specifications
| Product | |
|---|---|
| Brand name | HUBBELL |
| Color and finish | Blue |
| Color family | Blue |
| Product type | Light Switch |
Questions about this item
What voltage range does the IEC 60 A receptacle support in practice?
The receptacle is rated for 120/208 V AC single-phase operation, so the 208 V figure caps the maximum line-to-line voltage you can apply.
What mounting footprint does the 4.15 in face diameter require?
The flanged body needs a cut-out that accommodates a 4.15 in diameter face plus the four flange holes; the flange sits proud of the panel.
How is the spring-loaded cap installed, and what step is often missed?
The cap snaps onto the receptacle flange after wiring; the step often missed is tightening the gland nut before closing the cap so the IP67 seal engages.
More in Electrical Switches & Dimmers
Similar items
Killark VP10477 Pin & Sleeve Plug 100A 4P 4W 600VAC 250VDC Gray
- Gray
- Wiring Devices
Leviton Manufacturing Co. 052-10097-008 pull chain switch
Hubbell Incorporated HBL460C7W Watertight Pin & Sleeve Connector 60A 480V
- Red
- Red
Hubbell HBL560B7W Watertight Pin & Sleeve Inlet 60 A
- Red
- Red





