ICC ICFOJ1M503 Singlemode Duplex LC-LC Fibre Optic Cable 9.84 ft

Singlemode Duplex LC-LC Jumper

This nine-foot singlemode fibre patch cable carries duplex LC connectors on both ends, making it suited for long-distance links between network switches, patch panels or transceivers. The yellow jacket identifies the singlemode fibre type at a glance. It arrives as a single unit with a factory test-results label included. Installers who need multimode fibre or a different connector style will need another product.

Sustained Link Performance

Single-mode fibre supports low-loss transmission over kilometres, so a 9.84 ft run introduces negligible attenuation and no bandwidth bottleneck for typical Ethernet or SAN protocols. The UPC-polished end faces keep return loss low, preserving signal integrity during continuous high-throughput traffic. No active components are present, so performance does not degrade with temperature or duty cycle. The cable is not rated for outdoor or direct-burial use.

Thermals Noise and Power

As a passive glass-and-plastic assembly the jumper generates no heat, emits no noise and draws no power. The OFNR-rated riser jacket meets indoor flame-spread requirements without adding active cooling needs. Physical routing should avoid tight bends that could increase insertion loss. No electrical supply or grounding is required.