ICY DOCK ToughArmor MB993SK-B MB411SPO-2B 2.5 SATA SAS Drive Tray
Compatible 2.5-inch SATA SAS drive tray for ICY DOCK MB993 series backplanes
- Product typeRack
- Compatible tray for MB993 series backplanes
- Supports 2.5 inch SATA and SAS drives
- EZ-Slide slim design for quick drive swaps
- Rack-mountable server system form factor
- First listed by manufacturer in 2024
Drive Tray Compatibility
This tray is a replacement caddy designed for ICY DOCK MB993 Series mobile rack backplanes. It accepts 2.5 inch SATA and SAS hard drives or solid-state drives. The unit suits server administrators who need a spare or additional carrier for hot-swap bays. Builders using other backplane families cannot use this tray.
Sustained Operation Behaviour
The tray passes drive I/O directly to the backplane without added electronics. Thermal performance and sustained throughput therefore match the installed drive and the host backplane design. No onboard controller or firmware alters latency during extended workloads. The metal frame aids heat transfer to the chassis airflow path.
Installation Notes
The tray slides into the front of a compatible MB993 backplane and locks with a built-in latch. No tools or screws are required for the tray itself. Drives mount inside the tray using the standard four screw holes on the drive bottom. Misaligned screws or oversized drive labels can prevent the tray from seating fully.
How it compares
Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.
- Price $79.99
- Cheaper than about 99% of the 17,641 comparable items (median $1,910.99).
New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product type | Rack |
Questions about this item
Does the tray itself add any noise, heat or power draw when the 2.5" SATA or SAS drive runs all day?
The tray is a passive metal caddy with no fan or electronics, so it adds no noise, no heat and no power draw beyond the drive itself.
What must I already own for this MB411SPO-2B tray to work?
You need an ICY DOCK MB993 series backplane that accepts 2.5" SATA or SAS drives; the tray fits only that backplane.
Will this tray work alongside older 3.5" drives I keep in the same MB993 backplane?
The tray is sized for 2.5" drives only; a 3.5" drive will not fit in the same MB993 backplane slot.
More in Rack & Tower Servers
Similar items
Lenovo ThinkSystem ST650 V3 Tower Server Xeon Silver 4410Y 32GB 7D7A1007NA
- Workstation
- Tower
AVGPC 2U 24-Bay 2x Xeon 4310 128GB DDR4 1TB NVME 2x 8TB SSD
- 128 GB
- 1 TB





