We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green cylindrical PPR fitting with brass threaded insert, 25mm size

ifan

ifan Brass Insert Thread PPR Fitting PN25 25mm

SKU CH-EBJ6-NKR9D

Connects 25 mm PPR pipes with a brass-threaded fitting rated PN25 for water systems up to 75 °C

  • Tube size25 mm
  • Thread size25 mm
  • End connectionsWelding
  • Certifications and standardsISO
  • Maximum pressurePN25
  • Construction materialPPR
  • PN25 rating handles high-pressure systems up to 25 bar
  • Brass insert threads create secure, leak-free joints
  • PPR body resists corrosion in hot and cold water
  • Heat-fusion welding gives seamless, leak-proof connections
  • Service temperature range 0-75°C suits domestic plumbing

Brass PPR Fitting for 25 mm Pipework

This brass insert thread PPR fitting is designed for plumbing systems that use 25 mm piping. It suits installers who need a PN25-rated connector for hot and cold water lines up to 75°C. The ISO-certified body is eco-friendly and built for long service life.

Heat-Fusion Installation with Threaded Ends

The fitting joins by socket or butt fusion, creating a seamless, leak-proof joint on the pipe side while the threaded end connects to mating hardware. Clean, square pipe cuts and correct fusion temperature are essential; uneven heating or dirty surfaces are the most common causes of joint failure.

Verify Pipe Size, Pressure Rating

Confirm your system uses 25 mm PPR pipe and operates within the PN25 pressure class and 0-75°C range. Ensure the mating thread matches the 25 mm thread size on this fitting and that your installation method supports heat-fusion welding.

How it compares

Measured against everything we stock in Hose Fittings, Adapters & Clamps, at today’s prices. Recalculated every night.

Price $3.99
Cheaper than about 87% of the 2,955 comparable items (median $17.99).

Specifications

Product
Product typeFitting & Connector Sets
Processor
Thread size25 mm
Size & build
Tube size25 mm
Construction materialPPR
In the box
Number of items1 Carton
Environment & compliance
Certifications and standardsISO
Temperature range0-75 °C
More details
End connectionsWelding
Maximum pressurePN25

Questions about this item

How can I confirm the 25mm brass insert PPR fitting is sealed after heat-fusion welding?

After the joint cools, run water up to the PN25 pressure rating and inspect the weld line; a uniform bead with no weeping at 0-75°C service temperature confirms a sound connection.

What comes in the carton and what must I supply for installation?

The carton contains the 25mm brass insert thread PPR fitting; you must provide a compatible PPR pipe, a socket-fusion welding tool and any PTFE tape for the threaded end.

Should I choose the PN25 25mm version or a lower-pressure variant for a 75°C hot-water loop?

Select the PN25 25mm fitting; its pressure class and 75°C temperature rating are designed for demanding hot-water circuits, while lower-pressure versions would not meet the same service envelope.

More in Hose Fittings, Adapters & Clamps

Similar items