We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green cylindrical PPR pipe fitting 20mm welding end PN25 75°C

ifan

ifan PPR Fitting 20mm PN25 75°C Welding

SKU CH-QZ23-689H5

20 mm PPR fitting rated PN25 for hot and cold water up to 75 °C with heat-fusion welding ends

  • Tube size20 mm
  • Thread size20 mm
  • End connectionsWelding
  • Certifications and standardsISO
  • Maximum pressurePN25
  • Construction materialPPR
  • 20mm welding connection creates leak-proof joints
  • PN25 pressure rating handles demanding water systems
  • Operates up to 75°C for hot water use
  • PPR material resists corrosion and chemical damage
  • Smooth bore maintains unrestricted water flow

PPR Welding Fitting 20mm

This 20mm PPR fitting joins water tubes by heat-fusion welding for a seamless joint. The eco-friendly polypropylene body resists corrosion in hot and cold water systems. It is supplied as a single carton for plumbing installations.

PN25 Pressure Rating

The fitting is rated to PN25, confirming it can handle the pressure demands of typical mains-fed hot and cold water circuits. This single specification determines whether the part matches the system design pressure. Installers should verify the network pressure against this value before fitting.

75°C Temperature Limit

Under sustained load the material remains stable up to 75°C, maintaining structural integrity during continuous hot-water circulation. The smooth interior surface preserves unobstructed flow without degradation over time. It is not suited for systems that regularly exceed this temperature ceiling.

How it compares

Measured against everything we stock in Hose Fittings, Adapters & Clamps, at today’s prices. Recalculated every night.

Price $7.99
Cheaper than about 75% of the 2,955 comparable items (median $17.99).

Specifications

Product
Product typeFitting & Connector Sets
Processor
Thread size20 mm
Size & build
Tube size20 mm
Construction materialPPR
In the box
Number of items1 Carton
Environment & compliance
Certifications and standardsISO
Temperature range0-75 °C
More details
End connectionsWelding
Maximum pressurePN25

Questions about this item

What does the PN25 rating mean when the fitting is installed in a live water system?

PN25 means the fitting is rated for a maximum working pressure of 25 bar at 20 °C, so it will safely handle typical mains and pumped hot-water circuits without bursting.

How does the welding connection method affect joint reliability and what pipe size does it accept?

The socket-fusion weld creates a homogeneous, leak-proof joint on 20 mm PPR pipe, eliminating separate threads or seals that could loosen over time.

What wall or cabinet clearance is needed to mount a 20 mm PPR fitting of this type?

Allow enough space for the fusion tool to slide over the 20 mm socket — typically a few centimetres around the joint — so the heater plate can make full contact during welding.

More in Hose Fittings, Adapters & Clamps

Similar items