We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green PPR pipe fitting with smooth cylindrical body and welding ends

ifan

ifan PPR Fitting 25mm PN25 Welding End Connections

SKU CH-5QTG-44GK8

25 mm PPR pipe fitting with welding ends, rated PN25 for 0–75 °C water systems

  • Tube size25 mm
  • Thread size25 mm
  • End connectionsWelding
  • Certifications and standardsISO
  • Maximum pressurePN25
  • Construction materialPPR
  • PN25 rating handles high-pressure water systems
  • Heat-fusion welding creates leak-proof joints
  • PPR body resists corrosion in hot and cold water
  • Smooth bore maintains steady flow without obstruction
  • Rated for continuous use up to 75 °C

25 mm PPR Welding Fitting

This 25 mm PPR fitting joins plastic water tubes using heat-fusion welding. It suits installers building hot and cold water distribution systems that require corrosion-resistant, leak-proof joints. The ISO-certified body handles pressures up to PN25 and operates from 0 to 75 °C. Eco-friendly material supports long service life in residential and commercial plumbing.

PN25 Pressure and Temperature Limits

The PN25 rating sets the maximum working pressure for this fitting. Operation above 75 °C or beyond the rated pressure risks joint failure and reduces service life. Heat-fusion welding creates a seamless bond, yet the connection remains bound by the material’s thermal and pressure ceiling. Designers must keep system conditions within the stated range.

Heat-Fusion Installation Notes

Installation uses socket or butt fusion equipment to melt and fuse the welding ends into a single piece. Clean, square-cut pipe ends and correct heating time are critical; contamination or insufficient heat causes leaks. No threading or mechanical tightening is involved, so alignment must be set before the joint cools. Proper tool calibration avoids the most common faults.

How it compares

Measured against everything we stock in Hose Fittings, Adapters & Clamps, at today’s prices. Recalculated every night.

Price $3.99
Cheaper than about 87% of the 2,955 comparable items (median $17.99).

Specifications

Product
Product typeFitting & Connector Sets
Processor
Thread size25 mm
Size & build
Tube size25 mm
Construction materialPPR
In the box
Number of items1 Carton
Environment & compliance
Certifications and standardsISO
Temperature range0-75 °C
More details
End connectionsWelding
Maximum pressurePN25

Questions about this item

Should I choose the 25 mm PPR fitting for my pipe size?

Select this fitting when your pipe outside diameter is 25 mm and the system operates within the PN25 pressure class and the 0-75 °C temperature range.

What does the PN25 rating mean once the fitting is installed?

PN25 indicates the fitting is designed for a maximum working pressure of 25 bar at the reference temperature, so the installed joint must not exceed that pressure at any point in the 0-75 °C range.

How does the welding end connection affect the joint?

The welding ends are made for heat-fusion joining such as socket or butt fusion, creating a seamless, leak-proof connection without separate threads or seals.

More in Hose Fittings, Adapters & Clamps

Similar items