IHDAPP 2-Port Dual Monitor DisplayPort KVM Switch 8K@60Hz 4K@144Hz 3×USB 3.0 Audio Wired Remote

Two-PC dual-monitor KVM with 8K60 support

This IHDAPP KVM switch lets two computers share two DisplayPort monitors, three USB 3.0 peripherals and a 3.5 mm audio jack. It handles resolutions up to 8K at 60 Hz and 4K at 144 Hz, plus lower refresh rates down to 30 Hz. Switching is done by front push buttons or the included wired remote. The unit ships with a 12 V power adapter, two USB 3.0 cables and a desktop controller.

Check your ports and cables before ordering

Each computer must provide two DisplayPort outputs and one USB 3.0 port to drive both monitors and the shared peripherals. DisplayPort cables are not included, so you need four male-to-male DP leads rated for the resolution and refresh rate you want. Verify that your graphics cards can output the desired mode — mirror or extend — at the target resolution. The switch requires the supplied 12 V adapter; there is no bus-power option.

Replaces two separate keyboard-mouse sets

If you currently unplug monitors and peripherals to move between two PCs, this switch removes that friction and keeps both displays active in extend mode. The jump is worth it when you need simultaneous dual-monitor workspaces on either machine and want 5 Gbps USB 3.0 sharing for drives, printers or other devices. It is not for setups that need more than two computers, single-monitor configurations, or laptops without dual DisplayPort outputs.