We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 35 lb air paving breaker with T-grip handle, 25 in long

Ingersoll/Rand

Ingersoll/Rand PB35AL8 35 lb air paving breaker 1250 BPM 49.0 CFM

SKU CH-FMBH-Z9EQ9

A 35 lb air paving breaker delivering 1250 BPM at 49.0 CFM with a 25 in. overall length and T-grip handle

  • 35 lb weight class delivers high demolition power
  • 1250 blows per minute breaks concrete and asphalt fast
  • 0 CFM at full load sustains continuous heavy-duty operation
  • Spring-loaded anvil bushing keeps tool on work surface
  • One-piece housing removes side rods for simpler maintenance

35-pound air paving breaker

The Ingersoll/Rand PB35AL8 is a new 35-pound-class air paving breaker built for heavy demolition. It delivers 1,250 blows per minute with a 6-1/4-inch piston stroke and 1-3/4-inch bore. The tool consumes 49.0 CFM at 90 psi through a 3/4-inch NPT inlet and requires a minimum 3/4-inch hose.

Demolition crews needing high impact energy

This breaker suits operators breaking concrete, asphalt or compacted soil where a 35-pound tool provides the necessary force. It is not for users who lack a compressor capable of sustaining 49.0 CFM at 90 psi, nor for tasks requiring a lighter, more manoeuvrable hammer. The latch retainer and spring-loaded anvil bushing keep the chisel engaged on hard surfaces.

Simple hook-up with standard air fittings

Installation consists of connecting a 3/4-inch hose to the 3/4-inch NPT air inlet and securing the tool bit in the latch retainer. The one-piece housing removes side rods and springs that can loosen or fall out during vibration. Common issues arise when the air supply falls below 90 psi or the hose is undersized, causing a drop in blow rate and premature wear.

Specifications

Product
Brand nameIngersoll-Rand

Questions about this item

What compressor output is needed to run the 49.0 CFM air paving breaker?

A compressor capable of delivering 49.0 CFM at 90 psi is required to operate the breaker at full load.

Will the 3/4 in. NPT air inlet and 3/4 in. minimum hose size work with my existing 1/2 in. air lines?

No. The tool requires a 3/4 in. NPT inlet and a minimum 3/4 in. hose; 1/2 in. lines will restrict flow and prevent the 1250 BPM rating from being reached.

How can I confirm the breaker is hitting the rated 1250 blows per minute after setup?

Listen for a steady, rapid hammering rhythm at the work surface; the spring-loaded anvil bushing keeps the tool planted so each blow transfers cleanly when pressure holds at 90 psi.

More in Drills & Breakers

Similar items