Innocard U.3 Male SFF-TA-1001 PCIe Gen 4 to U.2 Female gender changer
Connects a U.3 male SFF-TA-1001 PCIe Gen 4 interface to a U.2 female port with hot-plug power protection
- Adapter typePCIe Gen4
- U.3 male to U.2 female gender changer enables PCIe Gen 4 connectivity
- Hot-plug power protection IC safeguards drives during insertion and removal
- Built-in PCIe ReDriver extends 16 GT/s signals over longer cables
- SMBus and side-band translators maintain management link integrity
- Designed and manufactured in Taiwan for server and HPC deployments
Adapter Purpose
The Innocard gender changer converts a U.3 male SFF-TA-1001 PCIe Gen 4 interface to a U.2 female connector. It enables connection of U.2 storage devices to U.3 backplanes or controllers in servers and high-performance computing platforms.
Build Integration
The adapter includes a built-in PCIe ReDriver to extend 16GT/s differential signals and a 100MHz clock buffer for longer trace lengths. Integrated SMBus, PERST#, WAKE#, CLKREQ# and PWRDIS voltage-level translators handle side-band management. Hot-plug power protection IC safeguards the slot during drive insertion.
Sustained Operation
Compliant with PCI Express Base Specification Rev 4.0 and SFF-9402 Version 1.1, the ReDriver and clock buffer maintain signal integrity over extended cable runs. Voltage-level translators ensure stable side-band communication under continuous load in rack, microserver and tower server deployments.
How it compares
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
- Price $40.99
- Pricier than about 84% of the 1,761 comparable items (median $18.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Adapter type | PCIe Gen4 |
Questions about this item
What is the signal-speed ceiling that appears first when the adapter runs at PCIe Gen 4 continuously?
The on-board ReDriver extends PCIe Gen 4 differential pairs at 16 GT/s, so the 16 GT/s lane rate is the first sustained-use limit.
Does the adapter generate audible noise or measurable heat during all-day operation?
The unit has no fan or active cooling; it relies on passive heat dissipation from the ReDriver and clock-buffer ICs.
Which existing connector must the system already provide for this gender changer to function?
The host side requires an OCulink 4i SFF-8612 port wired to the SFF-9402 Rev 1.1 pin-out.
More in Other Adapters & Couplers
Similar items
Centenex Electronics 24Pin Dual PSU ATX Adapter Cable 30cm Black 10 Pack
Intel E10G42BTDA Ethernet Svr Adapter X520-DA2
- Black
- Intel X520-DA2 Dual…
Cables To Go 03411 Two Port Keystone Single Gang Wall Plate White
- White
- With a wide selecti…





