Intel DC S3610 SSDSC2BX480G401 2.5" 480GB SATA enterprise SSD
- 480 GB
- 2.5 in (6.35 cm)
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
2.5-inch SATA enterprise SSD with 400 GB MLC storage, 550 MBps read, 400 MBps write, AES 256-bit encryption and power-loss data protection
Capacity 400GB
The Intel DC S3610 is a 2.5 inch 400GB solid-state drive built for servers and storage arrays that need consistent performance on a SATA III link. It uses MLC flash and a 20 nm lithography process to balance endurance and cost for business applications.
Replacing mechanical disks with this drive removes rotational latency and raises random read IOPS to 84,000 while sequential read reaches 550 MBps. The jump is worth it when databases, virtualisation hosts or logging systems hit I/O bottlenecks that a hard drive cannot clear.
The interface caps sequential throughput well below modern PCIe alternatives, so heavy write streams above 400 MBps will saturate the link. Buyers who need more bandwidth or lower latency than SATA allows should consider a different interface.
Measured against everything we stock in Server & Data Center SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Intel |
| Product line | DC S3610 |
| Model name | SSDSC2BX400G401 |
| Total capacity | 400 GB |
| Performance | |
| Sequential read speed | Up to 550 MB/s |
| Sequential write speed | Up to 400 MB/s |
| Random read (4K) | Up to 84,000 IOPS |
| Random write (4K) | Up to 25,000 IOPS |
| Read latency | 55 µs |
| Write latency | 66 µs |
| Storage | |
| NAND flash type | MLC |
| Ports & slots | |
| Interface type | SATA III |
| Power | |
| Idle power draw | 0.6 W |
| Active power draw | 4.3 W |
| Size & build | |
| Form factor | 2.5 in (6.35 cm) |
| Overall height | 7 mm |
| Product weight | 82g +/- 2g |
| Shipping weight | 0.45 kg |
| Package size | 178 × 152 × 51 mm |
| Environment & compliance | |
| Operating temperature range | 0 °C to 70 °C |
| Max shock tolerance | 1000G / 0.5 ms |
| Vibration tolerance | Operating: 2.17 GRMS (5–700 Hz) Non-Operating: 3.13 GRMS (5–800 Hz) |
| More details | |
| Mean time between failures | 2,000,000 h |
Other versions of this model
The drive measures .3 inches in height and uses a standard 2.5 inch form factor, so it fits any bay or caddy designed for that size.
It uses the SATA/600 standard; a common oversight is forgetting to connect both the data cable and the separate SATA power connector from the PSU.
The drive includes temperature monitoring, logging, and SMART attributes that track media wear and power-on hours, letting you schedule replacement before end of life.
More in Server & Data Center SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?