Intel DC S3710 SSDSC2BA200G401 2.5" 200GB SATA enterprise SSD
- 200 GB
- 2.5 in (6.35 cm)
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
2.5-inch 400GB SATA enterprise SSD with MLC memory, up to 550 MBps read and 470 MBps write, plus AES 256-bit encryption and power-loss protection
Capacity 400GB
The Intel DC S3710 series delivers a 2.5 inch form factor with a 400GB capacity built on MLC flash. It targets servers and storage arrays that demand consistent random write performance and data integrity features such as end-to-end protection and AES 256 bit hardware encryption.
This figure is the primary indicator of whether the drive suits your workload. The S3710 is engineered for mixed-use environments where sustained random writes matter more than peak sequential throughput, and the 43,000 IOPS rating reflects that design focus.
Capacitor-backed power loss protection preserves in-flight data during unexpected outages, while on-board temperature monitoring and logging help administrators track thermal trends across the deployment. These features reduce the risk of silent data corruption in always-on systems.
Measured against everything we stock in Server & Data Center SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Intel |
| Product line | DC S3710 |
| Model name | SSDSC2BA400G401 |
| Total capacity | 400 GB |
| Performance | |
| Sequential read speed | Up to 550 MB/s |
| Sequential write speed | Up to 470 MB/s |
| Random read (4K) | Up to 850,000 IOPS |
| Random write (4K) | Up to 43,000 IOPS |
| Read latency | 55 µs |
| Write latency | 66 µs |
| Storage | |
| NAND flash type | MLC |
| Ports & slots | |
| Interface type | SATA III |
| Power | |
| Idle power draw | 0.6 W |
| Active power draw | 5.4 W |
| Size & build | |
| Form factor | 2.5 in (6.35 cm) |
| Overall height | 7 mm |
| Product weight | 82g |
| Shipping weight | 0.45 kg |
| Package size | 178 × 152 × 51 mm |
| Environment & compliance | |
| Operating temperature range | 0 °C to 70 °C |
| Max shock tolerance | 1000 G / 0.5 ms |
| Vibration tolerance | Operating: 2.17 GRMS (5–700 Hz) Non-Operating: 3.13 GRMS (5–800 Hz) |
| More details | |
| Mean time between failures | 2,000,000 h |
Other versions of this model
It represents the peak throughput for large, contiguous reads over the SATA 6Gb/s link; real-world speeds depend on the controller, queue depth and workload mix.
The 6Gb/s SATA bus caps maximum transfer at roughly 600 MBps, so the drive's 550 MBps read and 470 MBps write ratings sit near that ceiling.
It fits a standard 2.5-inch drive bay with 7 mm height clearance and uses the regular SATA data and power connectors.
More in Server & Data Center SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?