Intel SSDSC2BB150G701 DC S3520 enterprise SSD 150GB 2.5" SATA MLC
- 150 GB
- 2.5 in (6.35 cm)
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
2.5-inch SATA enterprise SSD with MLC memory delivering 320 MBps reads, 300 MBps writes, 65,000 random read IOPS and 1.0 DWPD endurance for read-intensive workloads
Capacity 240GB
The Intel DC S3520 240GB SATA SSD is an enterprise-grade drive built for read-intensive data centre workloads. It uses MLC 3D NAND and a 2.5-inch form factor with a SATA III interface. The drive targets boot, web serving, and light database tasks where consistent latency matters.
Verify that your server or array has a free 2.5-inch drive bay and a SATA power connector. The drive draws 0.5W idle and 2.8W active, so the backplane must supply enough current. Confirm the controller supports SATA III speeds and that firmware is current for enterprise drives.
Compared to the DC S3510 series, this model uses 15% less idle power and 30% less active write power. The efficiency improvement reaches +35% performance per watt. Endurance is rated at 1.0 DWPD with a 2,000,000-hour MTBF, and the drive operates from 0°C to +70°C.
Measured against everything we stock in Server & Data Center SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Intel |
| Product line | DC S3520 |
| Model name | SSDSC2BB240G701 |
| Total capacity | 240 GB |
| Performance | |
| Sequential read speed | Up to 320 MB/s |
| Sequential write speed | Up to 300 MB/s |
| Random read (4K) | Up to 65,000 IOPS |
| Random write (4K) | Up to 16,000 IOPS |
| Read latency | 40µs |
| Write latency | 42µs |
| Storage | |
| NAND flash type | MLC |
| Ports & slots | |
| Interface type | SATA III |
| Power | |
| Idle power draw | 0.5 W |
| Active power draw | 2.8 W |
| Size & build | |
| Form factor | 2.5 in (6.35 cm) |
| Overall height | 7 mm |
| Product weight | 2.19 oz |
| Shipping weight | 0.09 kg |
| Package size | 150 × 109 × 23 mm |
| Environment & compliance | |
| Operating temperature range | 0 °C to 70 °C |
| Max shock tolerance | 1000G |
| Vibration tolerance | Operating: 2.17 GRMS (5-700 Hz) Non-Operating: 3.13 GRMS (5-800 Hz) |
| More details | |
| Mean time between failures | 2,000,000 h |
Other versions of this model
The drive ships as a bare 2.5" SATA unit; brackets, screws and data cables are not included and must be sourced separately.
The 240GB model offers 1.0 DWPD endurance and 65,000 random read IOPS, matching typical boot and web-tier requirements.
In a SATA 6 Gbps backplane the drive can sustain up to 320 MBps sequential reads, with 40 µs read latency and 2.8 W active power draw.
More in Server & Data Center SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?