We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver rectangular 2.5 inch SATA SSD with label showing Intel DC S3510 800GB

Intel

Intel SSDSC2BB800G601 DC S3510 800GB 2.5" SATA enterprise SSD

SKU CH-5BX3-PY1Y0 MPN SSDSC2BB800G601

2.5 inch SATA enterprise SSD with 800GB MLC capacity delivering up to 500MB/s read, 460MB/s write, 68,000 random read IOPS and 20,000 write IOPS

  • Total capacity800 GB
  • Sequential read speedup to 500 MB/s
  • Sequential write speedup to 460 MB/s
  • Interface typeSATA III
  • Form factor2.5 in (6.35 cm)
  • NAND flash typeMLC
  • Consistent performance for data-center workloads with up to 500 MB/s sequential read
  • Low-latency random access at 68,000 IOPS read and 20,000 IOPS write
  • Enterprise-grade endurance from MLC NAND and power-loss protection
  • Reduced operating cost with 0.6 W idle and 6.8 W active power draw
  • Drop-in 2.5" SATA form factor fits existing server bays

800GB 2.5" SATA enterprise SSD

The Intel DC S3510 SSDSC2BB800G601 is a 2.5-inch SATA III solid-state drive with 800GB of MLC NAND capacity. It delivers sequential reads up to 500 MB/s and writes up to 460 MB/s for data-centre workloads. Random 4KB performance reaches 68,000 read IOPS and 20,000 write IOPS.

Suited for SATA-based servers needing consistent

This drive fits servers and storage arrays that use 2.5-inch SATA bays and require steady quality of service. It is not for systems limited to lower-capacity drives or those that cannot accommodate a 6.8 W active power draw.

800GB MLC endurance rating

The 800GB MLC configuration determines the drive's write endurance and sustained performance envelope. Buyers should verify that this capacity and endurance level match the workload's daily write requirements.

How it compares

Measured against everything we stock in Server & Data Center SSDs, at today’s prices. Recalculated every night.

Price $209.99
Cheaper than about 91% of the 1,039 comparable items (median $992.99).
Total capacity 800 GB
Lower than about 80% of the 522 comparable items (median 3.2 TB).
Sequential read speed up to 500 MB/s
Lower than about 91% of the 311 comparable items (median 6,500 MB/s).
Price per TB $262.49 per TB
Cheaper than about 82% of the 522 comparable items (median $595.64 per TB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameIntel
Product lineDC S3510
Model nameSSDSC2BB800G601
Part numberSSDSC2BB800G601
Total capacity800 GB
Performance
Sequential read speedup to 500 MB/s
Sequential write speedup to 460 MB/s
Random read (4K)Up to 68,000 IOPS
Random write (4K)Up to 20,000 IOPS
Read latency55 µs
Write latency66 µs
Storage
NAND flash typeMLC
Ports & slots
Interface typeSATA III
Power
Idle power draw0.6 W
Active power drawUp to 6.8 W (TYP) 2.5 in
Size & build
Form factor2.5 in (6.35 cm)
Overall height7 mm
Shipping weight0.11 kg
Package size152 × 114 × 25 mm
Environment & compliance
Operating temperature range0 °C to 70 °C
Storage temperature range-55 °C to 95 °C
Max shock tolerance1000G
Vibration toleranceOperating: 2.17 GRMS (5-700 Hz)
Non-Operating: 3.13 GRMS (5-800 Hz)

Questions about this item

What does the 500 MB/s sequential read figure mean when the drive is installed in a server?

It is the maximum sustained throughput the SATA III link can deliver for large-block reads, so backup jobs or sequential log scans will top out near that rate once the controller and CPU keep the queue fed.

How does the SATA III interface limit real-world performance?

The 6 Gb/s SATA III bus caps sequential transfers at roughly 500 MB/s read and 460 MB/s write, so the drive cannot exceed those ceilings even if the NAND is faster.

Will the 2.5-inch form factor fit my existing drive bays and backplanes?

Yes, the industry-standard 2.5-inch dimensions match common HDD and SSD trays, allowing a direct drop-in replacement without adapters.

More in Server & Data Center SSDs

Similar items