We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray knit-back impact gloves with red nitrile palm coating and hi-vis yellow cuff, sold as a pair

Ironclad

Ironclad INDI-KC5-04-L Impact Gloves personal protective equipment

SKU CH-NBST-NAF0B

Seamless-knit nitrile-coated gloves with ANSI/ISEA Cut Level A3 and Impact Level 2 protection for hazardous handling

  • ANSI/ISEA Cut Level A3 protects against moderate cut hazards
  • ANSI/ISEA Impact Level 2 shields knuckles from impact injuries
  • Seamless HPPE knit back delivers dexterity and breathability
  • Nitrile palm coating ensures grip in wet and oily conditions
  • Silicone-free construction prevents surface contamination in sensitive tasks

What these gloves are and who they suit

The Ironclad INDI-KC5-04-L is a pair of large impact gloves built for workers who need cut resistance on the palm and certified impact protection on the back. The seamless knit liner blends HPPE, nylon and spandex for dexterity, while the nitrile coating provides grip in dry or lightly oily conditions. They meet ANSI 105 and EN 388:2016 standards for industrial use.

Practical limits of the ANSI 105

The gloves carry ANSI/ISEA Cut Level A3 and Impact Level 2, which cover moderate cut hazards and medium-energy impacts on the knuckles and fingers. They are not insulated, so they do not protect against cold or heat. The coating is silicone-free, making them safe for paint lines, but they are not touchscreen compatible and the cut coverage is limited to the palm side.

Check your setup before ordering

Confirm that a size large fits your hand and that palm-side cut protection matches the task; the back of the hand relies on impact padding rather than cut-resistant fibres. Verify that your workplace accepts ANSI 105 and EN 388:2016 certification and that a nitrile palm coating is approved for the chemicals or surfaces you handle.

How it compares

Measured against everything we stock in Face Masks, Respirators & PPE, at today’s prices. Recalculated every night.

Price $14.99
Cheaper than about 68% of the 5,612 comparable items (median $24.99).

Specifications

Product
Brand nameIRONCLAD PERFORMANCE WEAR

Questions about this item

Which size should I pick for the INDI-KC5-04-L gloves?

The model code ends with L, meaning this pair is a large size; choose the same letter you normally wear in work gloves.

What does ANSI/ISEA Impact Level 2 mean on the job?

It certifies the glove absorbs enough force to reduce peak impact on the knuckles and fingers to a level rated for moderate striking hazards.

How do the ANSI 105 and EN 388:2016 standards limit what these gloves can handle?

ANSI 105 rates cut level A3 and impact level 2, while EN 388:2016 adds abrasion, tear and puncture scores that together define the maximum mechanical protection the glove delivers.

More in Face Masks, Respirators & PPE

Similar items