JABSCO 29295-1000 In-Line Non Return Valve 1 In
Prevents backflow in 1-inch plumbing lines with a compact inline design
- Product typeDrain Components
- Prevents backflow with inline non-return valve design
- Fits 1-inch pipe connections for standard installations
- New condition ensures reliable performance from first use
- Corrosion-resistant construction handles saltwater and freshwater
- JABSCO brand quality for marine and plumbing applications
In-Line Non-Return Valve 1 In
The JABSCO 29295-1000 is a new inline check valve designed for one-inch plumbing connections. It prevents backflow in fluid transfer systems using a simple mechanical action. This component suits marine, RV and industrial installations where automatic flow control is required without electrical power.
Replacing a faulty or missing check valve
Install this valve when an existing unit fails to seal, allowing reverse flow that can drain tanks or damage pumps. The upgrade is worth it when a system loses prime between uses or when back-pressure causes leakage at connections. It restores reliable one-way flow in compatible pipework.
Fits one-inch hose or pipe runs
The valve sits directly in the line and requires fittings matched to the one-inch nominal bore. It needs no external power or control wiring, freeing up electrical capacity for other equipment. Confirm the application is non-potable before installation, as legislation restricts this model from drinking water use.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $25.99
- Cheaper than about 57% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Jabsco |
| Model name | 29295-1000 |
| Product type | Drain Components |
Questions about this item
What pipe diameter does the 1 in non-return valve fit?
The valve connects to 1 in pipework, matching the port size shown in the model 29295-1000 specification.
How do I orient the valve during installation so flow direction is correct?
Fit the valve with the arrow on the body pointing in the direction of flow; installing it backwards will block the system.
When should the internal flap or seal be inspected on this non-return valve?
Check the flap annually for salt build-up or debris that could prevent a tight seal, especially after pumping seawater.
More in Drain Stoppers, Strainers & Traps
Similar items
Viega 79125 Straight Union Trap, Bronze, Press-Fit 1/2
- Drain Components
- HAWA
Power Drive C4016X5/8 Chain Coupling Sprocket 5/8 in Bore 16 Teeth
- Drain Components





