We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular LCD power supply tester with 20+4 pin connector, 4.75 x 2.5 inches

JacobsParts Inc.

JacobsParts Inc. 20+4 Pin LCD Power Supply Tester

SKU CH-TB04-JYD92

Tests ATX, BTX and ITX power supplies via 20/24-pin connector, reading +3.3 V, +5 V, +12 V and +VSB on an LCD display without batteries

  • Product typeAT
  • Test power supplies safely to protect components
  • No batteries needed for instant operation
  • Checks 3.3V, 5V, 12V and +VSB rails
  • Works with ATX, BTX and ITX units
  • Compact 4.75 x 2.5 inch black design

20+4 Pin LCD Power Supply Tester

The JacobsParts digital tester checks ATX, BTX and ITX power supplies through their 20- or 24-pin main connector. It reads +3.3 V, +5 V, +12 V and +5 VSB rails on a built-in LCD without needing batteries. Technicians and builders use it to confirm a PSU is healthy before installing it in a system.

Voltage rails tested

The unit reports four voltages: +3.3 V, +5 V, +12 V and +5 V standby. If any rail falls outside specification the display shows the deviation, letting you spot a failing supply before it damages components. No other rails or connectors are measured by this model.

Suits quick bench checks, not full load validation

Ideal for repair shops, system integrators and hobbyists who need a fast go/no-go verdict on a spare or pulled power supply. Builders who require load testing, ripple measurement or SATA/PCI-E connector verification should use a dedicated load tester instead.

How it compares

Measured against everything we stock in Multimeters & Electrical Testers, at today’s prices. Recalculated every night.

Price $16.99
Cheaper than about 90% of the 971 comparable items (median $30.99).

Specifications

Product
Product typeAT

Questions about this item

What does the 20+4 pin LCD reading tell me once the tester is connected to an ATX power supply?

The LCD shows real-time voltage levels for the +3.3V, +5V, +12V and +5VSB rails supplied through the 20/24-pin ATX connector, letting you confirm each rail is within specification before powering a system.

Which connector standard does the tester use and what voltage rails does it check?

It plugs into the 20/24-pin ATX connector and reads the +3.3V, +5V, +12V and +5VSB rails directly from that interface.

What physical space does the tester need to fit beside a power supply?

The unit measures 4.75 inches by 2.5 inches (12.07 cm by 6.35 cm), so it sits comfortably on a bench or inside a case while connected to the ATX connector.

More in Multimeters & Electrical Testers

Similar items