Jansicotek Essager CG100W USB-C to USB-C cable 100W 3.3FT blue
- USB Type-C
- USB-C Cable
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Two 6.6 ft USB-A to USB-C cables deliver 120 W charging and 480 Mbps data transfer with a nylon-braided jacket
This Jansicotek Essager CGA120W set delivers two blue USB-A to USB-C cables rated for 6 A and 120 W power delivery. Each cord reaches 6.6 ft and includes a built-in E-marker chip so the source can negotiate the full 20 V output. Nylon braiding and zinc-alloy connectors are tested to survive more than 30,000 bend cycles.
The cables maintain the 120 W rate long enough to bring a compatible MacBook Pro to 90–100 % in roughly 1.8 hours and can push a phone to 60 % in about 30 minutes. Data moves at 480 Mbps while charging, so file transfers do not interrupt the power flow. Aluminium-alloy shells dissipate heat during extended sessions.
Full speed requires a wall adapter that supports the same 6 A PD or QC 4.0 protocol; a standard 5 V charger will fall back to much lower rates. Verify that your target device accepts 20 V input over USB-C before relying on the 120 W figure. The USB-A plug limits use to ports that can supply the necessary current.
Measured against everything we stock in Charging Stations & Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Jansicotek |
| Product line | Essager CGA120 W |
| Model name | Essager CGA120 W |
| Product type | USB-C Cable |
| Product color | Blue |
| Ports & slots | |
| Adapter connector | USB Type-C |
| Full-size USB ports | 1 |
| Power | |
| Output voltage | 20 V |
Other versions of this model
The built-in E-marker chip regulates power delivery up to 120 W, keeping temperature rise within USB-IF limits for continuous use.
A USB-A power adapter that supports QC 4.0 or PD at 20 V / 6 A is required; standard 5 V USB-A ports will only deliver their normal speed.
Yes, the cable negotiates down to 5 V automatically, so it charges legacy devices safely at their maximum supported rate.
More in Charging Stations & Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?