Jansicotek Essager CGA7A USB A to USB C cable 6.6FT 80W 7A Blue
- USB Type-C
- USB-C Cable
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A USB-C to USB-C cable delivering 240W at 48V/5A with an LED power display, E-marker chip and 480Mbps data transfer
The Jansicotek Essager HC240W is a USB-C to USB-C cable rated for 240W power delivery at 48V/5A. It includes an integrated E-marker chip with a 56K ohm resistor to stabilise current and voltage during charging. An LED display on the connector shows real-time power flow.
This cable targets owners of USB-C laptops, tablets and phones that accept up to 240W charging. It is not for buyers who need USB 3.0 or higher data rates, because the wire is limited to USB 2.0 at 480Mbps. It also lacks video-output support, so it cannot drive external displays.
The single figure that determines fit is the 240W USB-PD 3.1 rating combined with USB 2.0 data. If your device and charger both support 240W PD 3.1, this cable delivers that peak power. If you require 5Gbps or 10Gbps transfer or video alt-mode, a different cable is required.
Measured against everything we stock in Charging Stations & Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Jansicotek |
| Product line | Essager HC240 W |
| Model name | Essager HC240 W |
| Product type | USB-C Cable |
| Product color | Black |
| Ports & slots | |
| Adapter connector | USB Type-C |
| Full-size USB ports | 1 |
| Power | |
| Output voltage | 48 V |
Other versions of this model
The cable supports up to 48V/5A, so it will safely carry whatever power your existing charger provides up to that limit. The built-in E-marker chip and 56K ohm resistor help negotiate the correct voltage with any USB PD 3.1 source.
The integrated LED display shows real-time voltage and current; multiply the two readings to verify the wattage reaching your device.
Only the cable is included — a USB PD 3.1 charger capable of 48V/5A must be purchased separately to reach 240W.
More in Charging Stations & Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?