Jansicotek OZC6 4K@60Hz 3x1 HDMI video capturing device

4K@60Hz 3x1 HDMI capture switch

The Jansicotek OZC6 captures one of three HDMI sources at up to 4K 60 Hz and streams it over USB 3.0 to a PC or Mac for recording or live streaming. It also provides an HDMI loop-out for a local display and a dedicated microphone input with separate audio output. The device is aimed at gamers, educators and creators who need to switch between multiple consoles or cameras without a separate matrix switch.

Driver-free setup with IR remote control

The unit is powered over USB 3.0 and requires no proprietary driver; it appears as a standard video device in OBS Studio, VLC, Potplayer and other UVC-compatible software. Connect the three HDMI sources, plug the USB cable into a 3.0 port, select the active input with the included IR remote, and the video feed appears in the capture application. The most common issue is using a USB 2.0 port or a low-quality cable, which limits bandwidth and causes dropped frames or no signal at 4K 60 Hz.

Verify USB 3.0 port and host performance

Before ordering, confirm the host computer has a genuine USB 3.0 Type-A or Type-C port and meets the minimum hardware baseline: a desktop with an Intel Core i5-3400 and NVIDIA GT630 class GPU, or a notebook with an Intel Core i7-U 2.0 GHz and NVIDIA GT735 class GPU. Mac users need a quad-core i5 or better with 4 GB DDR3 and a DirectX 10 compatible graphics adapter. Systems below this level may not sustain 4K 60 Hz capture reliably.