VCE SJ661-100P-CA Cat6 RJ45 Pass Through Connectors 100-Pack
- Ethernet, Male
- Unshielded, Male
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects two devices to one Ethernet port at up to 1000 Mbps with LED status lights and an 80 cm USB power cable included
The Jansicotek OZHW3 adds two RJ45 ports to a single Gigabit network connection, letting two devices share one cable run. It is aimed at home or small-office users who need extra wired ports without running new cables or buying a managed switch. The adapter requires the included USB power cable to operate and cannot function without a power source. LED indicators show the link status for each port.
This splitter upgrades a single wall jack or router port into two simultaneous 1000 Mbps connections, removing the need to pull additional Cat5e through Cat8 cables through walls. The jump is worth it when you have exactly two nearby devices — such as a PC and a smart TV — and no spare switch ports or patch-panel capacity. It will not help if you need more than two ports or if the upstream link is limited to Fast Ethernet speeds.
Installation is straightforward: connect the upstream Ethernet cable, plug the two downstream devices into the RJ45 jacks, and attach the USB power cord to any 5 V USB port or charger. The most common issue is forgetting the power connection, which leaves the splitter completely inactive. Another pitfall is expecting full 1000 Mbps throughput on both ports at once; total bandwidth is shared across the single upstream link.
Measured against everything we stock in Network Adapters & RJ45 Plugs, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Jansicotek |
| Model name | OZHW3 |
| Product type | Ethernet Splitter 1 to 2 RJ45 Network Adapter |
| Adapter type | Gigabit RJ45 Ethernet Splitter 1 to 2 |
| Ports & slots | |
| Connector type | RJ45 |
| Size & build | |
| Product dimensions | 4.02 × 3.74 × 1.06 in |
| Product weight | 3.2 oz |
| In the box | |
| In the box | RJ45 Ethernet Splitter X1 USB Power Cord X1 |
The splitter measures 4.02 by 3.74 by 1.06 inches and weighs 3.2 ounces, so it fits on a desk or behind a router without brackets.
Connect the incoming Ethernet cable to the single RJ45 input, plug two devices into the two output ports, then attach the 80 cm USB power cable to a 5 V USB socket — the unit will not work without this power connection.
The included 80 cm USB charging cable may wear or be lost over time; any standard USB-A to micro-USB cable supplying 5 V can replace it to keep the splitter powered.
More in Network Adapters & RJ45 Plugs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?