VCE SJ661-100P-CA Cat6 RJ45 Pass Through Connectors 100-Pack
- Ethernet, Male
- Unshielded, Male
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Splits one RJ45 port into two simultaneous 1000 Mbps connections with USB power
The Jansicotek OZHW3 is a one-to-two RJ45 Ethernet splitter that lets two network devices share a single cable run. It is built for homes or small offices where extra wall ports are unavailable and running new cabling is impractical. The adapter requires the included USB power cable to operate and cannot function without an active power connection.
Under continuous load each of the two female ports delivers up to 1000 Mbps and the signals remain isolated so they do not interfere with each other. The physical tapping method divides the available bandwidth rather than switching it, so total throughput is shared between the connected devices. IPTV signals are not supported and the splitter does not assign IP addresses.
Installation is a simple matter of connecting the incoming cable, plugging in the two outgoing cables, and attaching the 80 cm USB lead to a stable power source. The gold-plated pins and shielded PCB ensure reliable contact, but forgetting the USB power is the most common reason the link fails to come up. No software configuration is required.
Measured against everything we stock in Network Adapters & RJ45 Plugs, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Jansicotek |
| Model name | OZHW3 |
| Product type | Ethernet Splitter 1 to 2 RJ45 Network Adapter |
| Adapter type | Gigabit RJ45 Ethernet Splitter 1 to 2 |
| Ports & slots | |
| Connector type | RJ45 |
| Size & build | |
| Product dimensions | 4.02 × 3.74 × 1.06 in |
| Product weight | 3.2 oz |
| In the box | |
| In the box | RJ45 Ethernet Splitter X1 USB Power Cord X1 |
The Jansicotek OZHW3 has no fan or moving parts, so it runs silently; the gold-plated pins and thick PCB keep temperatures low during continuous gigabit operation.
You need one incoming Cat5e or better Ethernet cable, two outgoing Cat5e–Cat8 patch cords, and a USB-A power source such as a wall charger or router USB port — the included 80 cm cable plugs into that source.
Yes, the RJ45 ports are backward-compatible with Cat5 and 10/100 equipment; each port simply negotiates the highest speed the connected cable and device support, up to 1000 Mbps.
More in Network Adapters & RJ45 Plugs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?