Jansicotek OZJ3 2×2 HDMI Matrix Switch 4K@60Hz 18.5Gbps

Two-input two-output HDMI matrix

The Jansicotek OZJ3 routes two HDMI sources to two displays independently so each screen can show the same or a different signal. It accepts 4K at 60 Hz with 18.5 Gbps bandwidth and passes HDR, 3D and deep-colour formats up to 48-bit. Audio formats include LPCM 7.1, Dolby Digital, DTS and Dolby TrueHD. The unit ships with an IR remote for front-panel switching.

Check source and display capabilities

Verify that both sources and both displays operate with HDMI 2.0 and HDCP 1.4 because the switch does not support HDCP 2.2. Use cables no longer than 10 metres built to the AWG26 HDMI 2.0b standard to guarantee the rated bandwidth. The device requires a DC 5 V supply capable of delivering 600 mA, so confirm the included adapter matches your mains voltage before connecting.

Steady operation within thermal limits

The matrix is rated for continuous use between minus 15 °C and plus 45 °C and draws a maximum of 600 mA at 5 V. Switching between inputs typically completes within three seconds with no frame drops or flash once the link is trained. LED indicators show the active routing so operators can confirm the signal path during extended sessions without interrupting playback.