We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact black KVM switch with front USB ports and rear HDMI, USB, RJ45 connections

Jansicotek

Jansicotek OZK1-New 8K@30Hz 2-Port HDMI USB KVM Switch

SKU CH-RZHM-97M8A

Lets you control two computers with one monitor, keyboard, mouse, three USB 3.0 peripherals and a network cable, switching by button or remote at up to 8K 30 Hz

  • PC connectionsHDMI and USB
  • Computer ports2 Ports
  • Monitor ports1 Ports
  • Supported video resolution7680 × 4320
  • Switching methodManual Switch and Remote Control
  • Auto-scan interval3 seconds
  • Control two computers with one monitor, keyboard and mouse
  • 8K at 30 Hz resolution for ultra-sharp visuals
  • Three USB 3.0 ports share peripherals at up to 5 Gbps
  • RJ45 network port lets both PCs share one wired connection
  • Switch instantly via front button or wireless remote

Two-computer HDMI KVM switch

The Jansicotek OZK1-New lets you operate two computers from a single monitor, keyboard and mouse. It provides two HDMI inputs and one HDMI output alongside three USB 3.0 ports and an RJ45 network port for shared peripherals. Maximum supported video resolution is 7680 x 4320 at 30 Hz. The unit is intended for desk setups that need to toggle between two PCs without unplugging cables.

Front-button and remote switching

Switching between the two connected computers is done with a push button on the device or the supplied wireless remote. LED indicators show which port is active. The automatic scan interval is fixed at 3 seconds if that mode is used. Cables route to the rear of the unit so the front stays clear for flash drives or other temporary devices. No software installation is required for basic operation.

Check graphics and monitor capabilities

The 7680 x 4320 at 30 Hz output only works when both the computer graphics card and the monitor support that resolution over HDMI 2.0b. If either end does not, the switch will fall back to a lower mode such as 4K at 120 Hz. Verify that each PC can drive the desired resolution before ordering. The package includes two USB data cables, a remote controller and a printed manual.

How it compares

Measured against everything we stock in KVM Switches & Rack Consoles, at today’s prices. Recalculated every night.

Price $31.99
Cheaper than about 85% of the 4,010 comparable items (median $105.49).

Specifications

Product
Brand nameJansicotek
Product lineOZK1-New
Model nameOZK1-New
Product typeHDMI, USB
Display
Supported video resolution7680 × 4320
Ports & slots
PC connectionsHDMI and USB
Computer ports2 Ports
Monitor ports1 Ports
USB supportWith USB support
Size & build
Product dimensions5.43 × 5.35 × 1.46 in
Product weight9.52 oz
In the box
In the boxKVM switch body*1pc, USB data Cable*2PCS, USB Manual* 1PC, Remote Controller *1PC
More details
Switching methodManual Switch and Remote Control
Auto-scan interval3 seconds
Status lightsYes

Questions about this item

How can I confirm the KVM switch is passing an 8K@30Hz signal after connecting both PCs and the monitor?

Check the front-panel LED indicators — they show which PC port is active. Use the button or the included remote to switch; the active port LED lights up. If your graphics card and monitor both support 7680×4320 at 30 Hz over HDMI 2.0b, the display will show that resolution without flicker.

Which cables and accessories ship in the box, and what must I provide myself?

The package includes the KVM switch, two USB data cables, a printed manual, and a wireless remote controller. You must supply two HDMI cables (one per computer to the switch inputs) and one HDMI cable from the switch output to your monitor.

Should I choose the 8K@30Hz mode or the 4K@120Hz mode for my setup?

Select 7680×4320 at 30 Hz only if both your computer’s GPU and your monitor explicitly support that resolution over HDMI 2.0b. Otherwise run at 4K@120Hz, which is also supported and backward-compatible with lower refresh rates.

More in KVM Switches & Rack Consoles

Similar items