Jansicotek PQ057 USB 3.2 A to C braided cable 3.3 ft 10Gbps 60W black

Jansicotek PQ057 USB 3.2 A to C cable

The Jansicotek PQ057 is a USB 3.2 Gen 2 cable with a USB-A plug on one end and a USB-C plug on the other. It targets users who need to connect USB-C peripherals such as external SSDs, hard drives, smartphones or tablets to a standard USB-A host port for data transfer and charging. The 3.3 ft braided cable features sturdy metal connectors and a 56 kΩ resistor for safe operation. It is not suitable for devices that require a Micro-USB or Lightning connector, nor for video output or host-to-host connections.

Sustained 10 Gbps data and 60 W charging

The cable supports a data sync rate of 10 Gbps (1250 MB/s) and can deliver up to 60 W at 3 A with QC 3.0 fast charging when both the charger and the device support the standard. Under continuous heavy transfers the metal connectors and braided jacket help maintain signal integrity and thermal performance, allowing the link to run at the rated speed without throttling. Actual throughput depends on the host controller, the target device and the quality of the USB-A power source; the cable itself is rated for the full Gen 2 bandwidth and power envelope.

Simple plug-and-play with clear limits

Installation is straightforward: plug the USB-A end into a computer, charger, power bank or docking station and the USB-C end into the target device — no drivers are required. The most common issues arise when users expect video output, attempt to link two host ports, or use a charger or device that does not support the necessary fast-charging protocol, which prevents the cable from reaching its rated 60 W. The product is also incompatible with iPhones and Micro-USB devices, so verifying the port type on the target device before purchase avoids returns.