TRENDnet TK-207K 2-Port USB KVM Switch
- 1 x USB (Type A), 1…
- 2 x USB Keyboard/Mo…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects two USB-C computers to one DisplayPort 1.4 monitor at up to 7680×4320 resolution and shares three USB 2.0 peripherals with a manual select button
The Jansicotek TJ-A0126 lets two USB-C laptops or desktops share one DisplayPort monitor and a single keyboard and mouse set. It accepts video from each computer over USB-C Gen 2 cables and outputs up to 7680×4320 at 60 Hz or 4K at 144 Hz through its DisplayPort 1.4 port. A front-panel button switches the active system instantly.
The unit runs without a fan, drawing the power it needs from the supplied USB-C to USB-A cable. No internal power supply means zero acoustic noise and negligible heat output during normal switching. The compact 5.43 × 5.35 × 1.46 inch enclosure weighs 9.52 ounces and sits unobtrusively on a desk.
Two USB-C Gen 2 cables and one USB-C to USB-A power cable are included so both computers can be connected straight from the box. Three downstream USB 2.0 ports at 480 Mbps keep keyboard, mouse and a printer or storage device attached to the active system without re-plugging. No software or drivers are required.
Measured against everything we stock in KVM Switches & Rack Consoles, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Brand name | Jansicotek |
| Product line | TJ-A0126 |
| Model name | TJ-A0126 |
| Product type | DisplayPort, USB |
| Performance | |
| Bandwidth rating | DP 1.4: 32.4 Gbit/s/USB 2.0: 480 Mbit/s |
| Display | |
| Supported video resolution | 7680 × 4320 |
| Ports & slots | |
| PC connections | USB-C cable |
| Computer ports | 2 Ports |
| Monitor ports | 1 Port |
| Size & build | |
| Product dimensions | 5.43 × 5.35 × 1.46 in |
| Product weight | 9.52 oz |
| In the box | |
| In the box | 1 x DP KVM Switch, 2 x USB-C Cable, 1 x USB-A to USB-C power cable |
| More details | |
| Switching method | Manual Switch |
| Auto-scan interval | 3 seconds |
| Status lights | Yes |
Connect each laptop to the switch using the supplied USB-C Gen-2 cables, link the DP 1.4 output to your monitor with your own DisplayPort cable, then plug the USB-C to USB-A power cable into a USB-A port or charger — the switch will not operate without this external power connection.
The two USB-C Gen-2 cables and the DP 1.4 monitor cable endure the most plug cycles; the mechanical select button and the three USB 2.0 peripheral ports also wear over time, while the internal DP 1.4 circuitry is solid-state and lasts longer.
The DP 1.4 link caps at 32.4 Gbps, so sustained 8K@60Hz hits that bandwidth limit before thermal throttling becomes a factor; USB peripherals remain on the 480 Mbps USB 2.0 channel regardless of video load.
More in KVM Switches & Rack Consoles
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?