We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black DisplayPort 1.4 fiber cable 100ft with gold-plated male connectors and zinc alloy shells

Jansicotek

Jansicotek TJ-A013 DisplayPort 1.4 fiber cable 100ft 32.4 Gbps 8K@60Hz 4K@144Hz 2K@240Hz VESA certified

SKU CH-1YAR-YRMQG

VESA-certified DisplayPort 1.4 fiber cable carries 8K at 60 Hz, 4K at 144 Hz and 2K at 240 Hz over 100 ft with 32.4 Gbps bandwidth

  • Refresh frequency8K(7680 × 4320)@60 Hz, 5K(5120 × 2880)@60 Hz, 4K@144 Hz, 4K@
  • Rated speedSupports 32.4 Gbit/s of bandwidth
  • Source connector1 x DisplayPort 1.4
  • Destination connector1 x DisplayPort 1.4
  • Connector genderMale to Male
  • Product typeDisplayPort Cable

Cable Length 100 Feet

  • VESA-certified DisplayPort 1.4 ensures 32.4 Gbps bandwidth for uncompressed 8K@60Hz
  • 100 ft fiber design delivers 4K@144Hz and 2K@240Hz without signal loss
  • 24K gold-plated connectors and zinc-alloy shells resist wear and cracking
  • Single Al-Mylar foil shield blocks electromagnetic interference for stable transmission
  • Directional Source/Display plugs guarantee correct installation for VR and multi-monitor setups

Who this cable serves

The Jansicotek TJ-A013 is a DisplayPort 1.4 fiber optic cable built for PC builders and VR users who need an active link over 100 ft. It carries 32.4 Gbps bandwidth with VESA certification and male-to-male gold-plated connectors. The directional design labels Source and Display ends so the signal path is correct from graphics card to monitor or headset.

Behaviour on long runs

Because the link uses four optical fibers, the 32.4 Gbps throughput stays stable across the full 100 ft without the signal loss that copper suffers at distance. The spec lists 8K at 60 Hz, 4K at 144 Hz and 2K at 240 Hz as supported refresh rates, so high-frame-rate gaming and 8K streaming remain consistent even during extended sessions. DSC 1.2 and HDR metadata pass through unchanged.

Check before ordering

Verify that your source device has a DisplayPort 1.4 output and your display accepts a DisplayPort 1.4 input; the cable is directional and will not work if the Source and Display plugs are reversed. Ensure the route can accommodate the slim fiber jacket without sharp bends that could damage the cores. No external power adapter is required for the active converters inside the connectors.

How it compares

Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.

Price $73.99
Pricier than about 90% of the 3,804 comparable items (median $15.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameJansicotek
Model nameTJ-A013
Product typeDisplayPort Cable
Product colorBlack
Performance
Rated speedSupports 32.4 Gbit/s of bandwidth
Display
Refresh frequency8K(7680 × 4320)@60 Hz, 5K(5120 × 2880)@60 Hz, 4K@144 Hz, 4K@60 Hz, 2K@240 Hz, 1080P@240 Hz
Ports & slots
Source connector1 x DisplayPort 1.4
Destination connector1 x DisplayPort 1.4
Connector genderMale to Male

Other versions of this model

5 more in the same range

Questions about this item

Does the 100ft fiber cable draw extra power or get warm during all-day 8K@60Hz use?

The fiber design transmits the 32.4 Gbps signal optically, so the cable itself stays cool and adds no noticeable heat or power draw during continuous 8K@60Hz operation.

My GPU and monitor both have standard DisplayPort 1.4 ports — is anything else required to run this cable?

No extra hardware is needed; the male-to-male DP 1.4 connectors plug directly into your graphics card "Source" port and monitor "Display" port.

Will this directional 100ft fiber cable work with my older DP 1.2 monitor at 4K@60Hz?

Yes — the cable is backward compatible with DP 1.2 and HDCP 2.2, so it will carry 4K@60Hz to your existing monitor when connected in the correct Source-to-Display direction.

More in DisplayPort Monitor Cables

Similar items