We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Jansicotek

Jansicotek TJ-A033 DisplayPort 1.4 cable 3.3 ft 8K@60Hz 4K@144Hz HDR

SKU CH-7AMS-8W8VS

A 3.3 ft DisplayPort 1.4 cable carrying 8K at 60 Hz and 4K at 144 Hz with HDR, HBR3 bandwidth and triple shielding

  • Refresh frequency8K (7680 × 4320) @ 60 Hz / 30 Hz, 5K (5120 × 2880) @ 60 Hz /
  • Rated speedTest Value
  • Cable length3.3 ft (1.01 m)
  • Connector count1
  • Source connector1 x DisplayPort 1.4
  • Destination connector1 x DisplayPort 1.4

Cable Length 3.3 Feet

  • 8K at 60 Hz with HBR3 32.4 Gbit/s bandwidth
  • 4K at 144 Hz and 2K at 240 Hz for high-refresh gaming
  • HDR, HDCP 2.2 and DSC 1.2 for protected 10-bit colour
  • Triple-shielded solid copper with 24 K gold-plated connectors
  • VESA-certified DisplayPort 1.4 male-to-male, 3.3 ft

8K DisplayPort 1.4 cable for high-refresh gaming

The Jansicotek TJ-A033 is a 3.3 ft male-to-male DisplayPort 1.4 cable rated for HBR3 bandwidth up to 32.4 Gbit/s. It drives 8K at 60 Hz, 4K at 144 Hz and 2K at 240 Hz with HDR, HDCP 2.2 and DSC 1.2 support. VESA certification confirms compliance for demanding graphics cards and monitors.

Passive copper construction with triple shielding

Solid copper conductors and triple shielding keep signal integrity stable at full 32.4 Gbit/s without active electronics or external power. The passive design produces no heat or noise, so thermals and acoustics are irrelevant in normal use. Gold-plated contacts resist oxidation for consistent conductivity over time.

Nylon-braided jacket and latching connectors

A flexible nylon braid protects the 3.3 ft run from abrasion and kinking during routing behind desks or through cable-management channels. Latching DisplayPort plugs prevent accidental disconnects when monitors are adjusted. The short length suits same-desk setups; builders needing longer runs or in-wall ratings should look elsewhere.

How it compares

Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.

Price $10.99
Cheaper than about 90% of the 3,804 comparable items (median $15.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameJansicotek
Model nameTJ-A033
Product typeDisplayPort Cable
Product colorBlack
Performance
Rated speedTest Value
Display
Refresh frequency8K (7680 × 4320) @ 60 Hz / 30 Hz,
5K (5120 × 2880) @ 60 Hz / 30 Hz,
4K (4096 × 2160) @ 144 Hz / 120 Hz/60 Hz/30 Hz,
2K (2560 × 1440) @ 240 Hz / 165 Hz/144 Hz/120 Hz/60 Hz/30 Hz,
1080p (1920 × 1080) @ 240 Hz / 165 Hz/144 Hz/120 Hz/60 Hz/30 Hz,
Ports & slots
Connector count1
Source connector1 x DisplayPort 1.4
Destination connector1 x DisplayPort 1.4
Connector detailsDisplayPort to DisplayPort 1.4 Cable 8K@60 Hz
Connector genderMale to Male
Size & build
Overall length3.3 ft (1.01 m)
Cable length3.3 ft (1.01 m)
Cable shieldingTriple-shielded
Conductor typeSolid Copper Conductor
Build detailsTest123
Compatibility
Supported platformsWorks with Windows Vista

Other versions of this model

5 more in the same range

Questions about this item

How do I plug the 3.3 ft DisplayPort 1.4 cable in, and what step do people miss?

Push each male connector firmly until the latches click on both the GPU and monitor; the step most people miss is forgetting to squeeze the release tabs when unplugging, which can damage the port.

What will need replacement on this HBR3-rated cable over time?

The cable itself has no serviceable parts; only the 24K gold-plated connectors or nylon braid could wear after repeated mating cycles, so replace the whole cable if signal drops appear.

At 32.4 Gbit/s bandwidth, what limit appears first during sustained 8K@60Hz HDR use?

The 3.3 ft length keeps signal loss low, so the first limit is usually the source or sink device’s DSC compression or thermal throttling, not the cable’s HBR3 bandwidth ceiling.

More in DisplayPort Monitor Cables

Similar items