We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black DisplayPort 2.0 cable with gold-plated male connectors, 6.6 ft long, nylon braided finish

Jansicotek

Jansicotek TJ-A114 DisplayPort 2.0 cable 6.6 ft 16K@60Hz 80Gbps HDR

SKU CH-WYKC-0C9XQ

DisplayPort 2.0 cable supports 16K at 60 Hz, 8K at 60 Hz and 4K at 165 Hz over 6.6 ft with 80 Gbps bandwidth and HDR

  • Refresh frequency16K@60 Hz(With DSC)/10K@60 Hz/8K@60 Hz/4K@165 Hz/4K@144 Hz(N
  • Cable length6.6 ft (2.01 m)
  • Connector count1
  • Source connector1 x DisplayPort 2.0
  • Destination connector1 x DisplayPort 2.0
  • Connector detailsDisplayPort to DisplayPort 2.0 Cable 16K@60 Hz
  • 80 Gbps bandwidth enables 16K 60 Hz with DSC
  • 16K 60 Hz and 8K 60 Hz supported
  • 4K 144 Hz and 4K 165 Hz with no compression
  • Dynamic HDR 4:4:4 colour for richer images
  • Backwards compatible with DP 1.4 and 1.2

What this cable does

The Jansicotek TJ-A114 is a DisplayPort 2.0 copper cable built for 80 Gbps bandwidth. Male-to-male connectors link a source device to a monitor, projector or TV. It targets users who need 16K at 60 Hz with DSC or 4K at 165 Hz without compression. The 6.6 ft length suits typical desk-to-display runs.

Bandwidth and resolution limits

DisplayPort 2.0 tops out at 80 Gbps, so 16K at 60 Hz requires Display Stream Compression. Uncompressed signals reach 4K at 144 Hz or 8K at 60 Hz. The cable is backwards compatible with DP 1.4 and 1.2, but those older ports cannot deliver the higher refresh rates or resolutions. Dynamic HDR 4:4:4 colour is supported within the available bandwidth.

Build and daily handling

A 6.3 mm nylon-braided jacket protects 30 AWG copper conductors with gold-plated contacts. Aluminium connector shells resist wear from repeated plugging. The plug-and-play design needs no drivers. Length and flexibility allow routing behind desks or through cable trays without sharp bends.

How it compares

Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.

Price $13.99
Cheaper than about 65% of the 3,804 comparable items (median $15.99).
Refresh frequency 16K@60 Hz(With DSC)/10K@60 Hz/8K@60 Hz/4K@165 Hz/4K@144 Hz(No Compression).
Typical for this category: the median of 648 items is 60 Hz.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameJansicotek
Model nameTJ-A114
Product typeDisplayPort Cable
Product colorBlack
Display
Refresh frequency16K@60 Hz(With DSC)/10K@60 Hz/8K@60 Hz/4K@165 Hz/4K@144 Hz(No Compression).
Ports & slots
Connector count1
Source connector1 x DisplayPort 2.0
Destination connector1 x DisplayPort 2.0
Connector detailsDisplayPort to DisplayPort 2.0 Cable 16K@60 Hz
Connector genderMale to Male
Size & build
Overall length6.56 ft (2 m)
Cable length6.6 ft (2.01 m)

Other versions of this model

5 more in the same range

Questions about this item

Is the 6.6 ft length the only option for this cable?

This listing covers the 6.6 ft version; the supplier also offers 1 m, 1.5 m, 2 m and 3 m lengths for the same TJ-A114 model.

What does the 16K@60Hz rating mean when I plug it into my monitor?

It delivers 15360×8640 at 60 Hz using Display Stream Compression; without compression it handles 3840×2160 at 144 Hz or 165 Hz.

Does the DisplayPort 2.0 interface actually reach 80 Gbps in use?

The cable is built to the DP 2.0 spec with 80 Gbps bandwidth, gold-plated connectors and 30 AWG copper, so it supports the full 80 Gbps link rate.

More in DisplayPort Monitor Cables

Similar items