Jansicotek TJ-A114 DisplayPort 2.0 cable 3.3 ft 80 Gbps 16K@60 Hz
- 3.3 ft (1.01 m)
- DisplayPort Cable
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 3.3 ft DisplayPort 2.1 cable carrying 80 Gbps for 16K at 60 Hz, 8K at 120 Hz and 4K at 240 Hz with triple shielding and 28 AWG copper conductors
The Jansicotek TJ-A285 is a 3.3 ft DisplayPort 2.1 cable rated for 80 Gbps bandwidth. It carries 16K at 60 Hz, 8K at 120 Hz, 4K at 240 Hz and 2K at 360 Hz with Dynamic HDR, HDCP 2.2 and DSC 1.2a support. Triple shielding, a 28 AWG OFC conductor and gold-plated connectors are built into a double nylon braid.
The cable is backward compatible with DisplayPort 1.4, 1.3, 1.2, 1.2a, 1.1 and 1.0 so it can replace any older DP link. The jump is worth it when the source and display both support 80 Gbps and you need 16K, high-refresh 4K or 8K at 120 Hz without compression artefacts.
Suits PC gamers, content creators and multi-monitor users whose graphics card and monitor both implement DisplayPort 2.1 at full 80 Gbps. Buyers whose hardware tops out at DisplayPort 1.4 or lower will not gain the headline resolutions and should look at a cable matched to their actual link speed.
Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Jansicotek |
| Model name | TJ-A285 |
| Product type | DisplayPort Cable |
| Product color | Green |
| Performance | |
| Rated speed | Test Value |
| Display | |
| Refresh frequency | 16K@60 Hz, 8K@120 Hz, 4K@144 Hz, 4K@165 Hz, 2K@360 Hz |
| Ports & slots | |
| Connector count | 1 |
| Source connector | 1 x DisplayPort2.0 |
| Destination connector | 1 x DisplayPort2.0 |
| Connector details | DisplayPort to DisplayPort 2.0 Cable 16K@60 Hz |
| Connector gender | Male to Male |
| Size & build | |
| Overall length | 3.3 ft (1.01 m) |
| Cable length | 3.3 ft (1.01 m) |
| Cable shielding | Triple-shielded |
| Conductor type | Solid Copper Conductor |
| Build details | Test123 |
| Compatibility | |
| Supported platforms | Works with Windows Vista |
Other versions of this model
The 3.3 ft length and straight male-to-male plugs require enough rear space for the cable bend radius; the grooved, buckle-free shell is designed for tight spots.
Both ends are identical male DisplayPort 2.1 connectors; insert either end into the graphics card and the other into the monitor until the latch clicks.
With a 15,000-bend lifespan the cable lasts years under normal desk routing; inspect the braid and connectors if you notice signal drop-outs or physical fraying.
More in DisplayPort Monitor Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?