JG MAKER PLA Filament 1.75 mm 1 kg Red

What this filament is and who it suits

JG MAKER supplies a 1.75 mm PLA+ filament on a 1 kg spool coloured red. It is made for hobbyists and makers who run fused-deposition printers or 3D pens and want a biodegradable, non-toxic material that feeds reliably without clogging or bubbling.

Practical limits of the 1.75 mm PLA standard

The filament holds a dimensional accuracy of ±0.02 mm, with the supplier also noting ±0.03 mm and ±0.05 mm in different references. Recommended nozzle temperature sits between 200 °C and 230 °C, while a heated bed up to 80 °C is optional. Printers that cannot reach these temperatures or that require a different diameter will not work with this spool.

Build quality and daily handling

Full mechanical winding and a manual inspection keep the coil tidy and tangle-free, so the filament unwinds smoothly during long prints. The supplier advises storing the spool in a cool, dry, ventilated place and threading the loose end into the side holes after each session to prevent knots. Its 100 % biodegradable composition means no harmful fumes during printing.