We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black steel Micro-ATX case with mesh panels and a top carry handle

JONSBO

JONSBO C6 HANDLE MTX PC Case Black

SKU CH-17PP-BBD4R

Micro-ATX steel chassis with mesh panels, tool-free panels, one 3.5-inch and two 2.5-inch bays, 255 mm GPU limit, 75 mm cooler limit, 185 mm PSU limit

  • Max graphics card length255 mm
  • Housing materialSteel
  • Supported motherboard sizesMicro ATX / Mini ITX
  • 3.5-inch internal bays1
  • 2.5-inch internal bays2
  • Front panel portsType-C(20PIN)/USB3.0 × 1/AUDIO*1+MIC*1(Headset+mic combined)

Model C6 Handle Black

  • Mesh panels on all sides for unrestricted airflow
  • Tool-free top and side panels for instant internal access
  • Fits Micro-ATX and Mini-ITX boards in a compact steel frame
  • Supports one 3.5″ drive or two 2.5″ drives
  • GPU up to 255 mm, CPU cooler up to 75 mm, PSU up to 185 mm

Compact Micro ATX chassis with carry handle

The JONSBO C6 HANDLE is a steel Micro ATX and Mini-ITX case finished in black. Its integrated top handle makes it simple to move between desks or LAN events. The compact footprint suits builders who want a tidy desktop tower without a full-size ATX layout. Mesh panels on every side keep airflow unrestricted for the supported hardware.

Tool-free panels replace screwed side windows

Thumb screws and captive panels are gone; the top cover and both side panels lift off without tools. This speeds up drive swaps, fan changes or a quick dust-out. The jump is worth it for anyone who opens their case more than once a year, while builders who never touch internals after the first build will see less benefit.

75 mm cooler ceiling and 185 mm PSU limit define

The CPU cooler height maxes out at 75 mm, so only low-profile air coolers or thin AIO cold plates will fit. Power supplies longer than 185 mm cannot be mounted. Graphics cards up to 255 mm are supported, but the single 120 mm or 140 mm fan slots at front, top and bottom restrict total airflow capacity for high-wattage parts.

How it compares

Measured against everything we stock in Tower & Desktop PC Cases, at today’s prices. Recalculated every night.

Price $45.99
Cheaper than about 91% of the 1,468 comparable items (median $100.99).
Max graphics card length 255 mm
Lower than about 94% of the 894 comparable items (median 400 mm).

New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameJonsbo
Product typeMicro ATX / Mini-ITX
Product colorBlack
Storage
3.5-inch internal bays1
2.5-inch internal bays2
Ports & slots
Front panel portsType-C(20PIN)/USB3.0 × 1/AUDIO*1+MIC*1(Headset+mic combined)
Size & build
Max graphics card length255 mm
Housing materialSteel
Fan mounting optionsBottom - 1 × 120 mm / Bottom - 1 × 140 mm / Front - 1 × 120 mm / Top - 1 × 120 mm / Top - 1 × 140 mm
Product dimensions202 mm(W) x266 mm(D)x295.2 mm(H) (Include the footpad)
Compatibility
Supported motherboard sizesMicro ATX / Mini ITX
CPU cooler height limit75 mm
PSU length limit185 mm

Other versions of this model

5 more in the same range

Questions about this item

How much clearance do I need above the motherboard for the 75 mm CPU cooler limit?

The case allows a maximum CPU cooler height of 75 mm, so measure from the motherboard surface to the side panel and ensure your cooler is 75 mm or shorter.

Which screws come out first when removing the tool-free upper cover and side panel?

There are no screws; lift the top cover straight up, then slide the side panel rearward to release the tool-free latches.

When should I clean the mesh panels to keep airflow for the 120 mm and 140 mm fan mounts?

Vacuum or brush the front, top and bottom mesh every three to six months, or whenever dust buildup becomes visible, to maintain airflow to the 120 mm and 140 mm fan positions.

More in Tower & Desktop PC Cases

Similar items