We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact black rectangular servo with silver output shaft and three-wire lead

JUSHIDE

JUSHIDE JS-6615 Digital Servo 17kg IP66 Metal Gear Dual Ball Bearing

SKU CH-GR5C-XYYD0

A waterproof IP66 digital servo delivering 17 kg-cm torque at 6.8 V with metal gears and dual ball bearings for 1/10 RC cars, robots and drones

  • Maximum continuous current2500 mA
  • Maximum burst current4500 mA
  • Voltage range4.8 V - 6.8 V
  • Transistor typeBrushed
  • Programmable functionsDirection, Dead Band Width, End Point Adjustment
  • Torque17 kg-cm @ 6.8 V
  • High torque of 17 kg-cm powers demanding RC cars and robots
  • IP66 waterproof rating withstands harsh outdoor and off-road conditions
  • Digital control system delivers fast response for precise movement
  • Metal gears with dual ball bearings ensure durable and smooth operation
  • Standard 6 cm size fits 1/10 scale cars, drones and airplanes

JUSHIDE JS-6615 Digital Servo 17kg IP66

The JUSHIDE JS-6615 is a standard-size digital servo built for 1/10 scale RC cars, robots, drones and airplanes. It delivers 17 kg-cm of torque at 6.8 V and uses a brushed motor with metal gears and dual ball bearings. The IP66 rating protects the unit against dust and powerful water jets. Programmable functions include direction, dead-band width and end-point adjustment.

Voltage and Current Limits

The servo operates from 4.8 V to 6.8 V, drawing up to 2500 mA continuously and 4500 mA in bursts. A supply that cannot sustain the burst current will cause voltage sag and reduced torque. The IP66 seal resists water jets but is not rated for continuous submersion. The brushed motor and gear train are designed for the stated torque; exceeding the load will accelerate wear.

Pre-Installation Checklist

Verify that your receiver and battery can provide 6.8 V and at least 4500 mA peak current. Confirm the 6 cm by 6 cm by 3.3 cm case fits the mounting area and that the output spline matches your servo horn. Ensure the control electronics support digital servo signal timing. The unit is not a startup kit, so no extra accessories are included.

How it compares

Measured against everything we stock in Digital Servos & Gyro Controllers, at today’s prices. Recalculated every night.

Price $17.99
Cheaper than about 78% of the 21 comparable items (median $27.99).

Specifications

Product
Brand nameJUSHIDE
Model numberJS-6615
Product typeSERVO
Power
Maximum continuous current2500 mA
Maximum burst current4500 mA
Voltage range4.8 V - 6.8 V
Size & build
Size or dimensions6 × 6 × 3.3 cm (2.36 × 2.36 × 1.3 in)
Overall length6 cm(2.36 in)
Overall width6 cm (2.36 in)
Overall height3.3 cm(1.3 in)
Product weight60g
Compatibility
Compatible with1/10 RC Car, Robot, Drone, Airplane
More details
Transistor typeBrushed
Programmable functionsDirection, Dead Band Width, End Point Adjustment
Torque17 kg-cm @ 6.8 V
Kit typeStartup Kit - No

Questions about this item

Is the JS-6615 sold in different torque versions or only as the 17 kg-cm model?

The JS-6615 is offered as a single standard-size servo rated at 17 kg-cm torque at 6.8 V, with no alternative torque versions listed.

What does the 17 kg-cm torque rating mean when the servo is installed in an RC car?

At 6.8 V the servo can hold 17 kg-cm, giving strong steering or throttle force for a 1/10 scale car, robot or drone under heavy load.

What control interface does the JS-6615 use and what voltage range does it support?

It uses a standard PWM signal lead and operates from 4.8 V to 6.8 V, with torque and speed scaling across that range.

More in Digital Servos & Gyro Controllers

Similar items