Kastar SLB-10A 3-Pack Battery and LTD2 USB Charger
- 1 Charger + 3 Batte…
- Li-Ion
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Three lithium-ion batteries with a dual-slot USB charger showing charge status on an LCD screen
This Kastar kit supplies three lithium-ion batteries rated at 3.7 volts and 1400 milliampere-hours each, together with an LTD2 charger that powers two cells simultaneously. The pack targets owners of compatible Samsung, JVC and Zoom cameras who need spare power for extended shooting sessions.
The charger accepts 5 volts at 2 to 3 amps through either Micro-USB or USB-C inputs, drawing up to 15 watts while delivering 4.2 volts at 800 milliamps per slot. No active cooling is fitted, so operation stays silent and surface temperatures remain low during typical charge cycles.
Each cell stores 5.18 watt-hours and fits the same form factor as the original BN-VH105 and SLB-10A packs, allowing direct insertion into listed camera models. The charger features an LCD that shows real-time capacity and status, while interchangeable plates let the same unit serve other battery types without extra cables.
Measured against everything we stock in Camera Batteries, Grips & Chargers, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Brand name | Kastar |
| Model name | SLB-10A |
| Part number | CH-LTD2-3B-SLB10A-F |
| Total capacity | 5.18 Wh |
| Product type | Battery & Charger |
| Power | |
| Battery chemistry | Li-Ion |
| Size & build | |
| Product dimensions | 5 × 3 × 3 in |
| In the box | |
| Pack contents | 1 Charger + 3 Batteries |
Other versions of this model
Slide each battery onto the charger plate until it clicks, then connect the Micro-USB or Type-C cable to a 5V 2-3A source; the LCD will only show capacity after the input is live.
Store them at roughly half charge in a cool place if unused for weeks, and recharge every few months to prevent deep discharge below the protection threshold.
The 15W input ceiling means the charger draws the full 5V 3A from the adapter, so sustained dual-bay charging depends on the USB source maintaining that current without throttling.
More in Camera Batteries, Grips & Chargers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?