We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Kastar BP-A100 98 Wh lithium-ion battery with D-Tap charger kit

Kastar

Kastar BP-A100 98 Wh Battery & D-Tap Charger Kit

SKU CH-AEJV-MNZN1

98 Wh lithium-ion battery with dual D-Tap charger powering two packs simultaneously and offering USB 5 V 2.1 A output

  • Total capacity98 Wh
  • Pack contents1 Charger + 1 Battery
  • Battery chemistryLi-Ion
  • Product typeBattery & Charger
  • Product dimensions6.5 × 3 × 2 in
  • Key featuresLCD USB Dual charger, can charge 2 batteries at the same tim
  • 98 Wh capacity powers cinema cameras longer
  • 4 V 6800 mAh lithium-ion cell has no memory effect
  • Dual D-Tap ports accept 11–16.8 V input for fast charging
  • Built-in MCU stops charge on over-voltage, short circuit or overheat
  • USB 5 V 2.1 A output charges phones and tablets directly

Battery kit for Canon cinema cameras

The Kastar BP-A100 kit supplies a 98 Wh lithium-ion battery and a dual D-Tap charger compatible with Canon BP-A series batteries and CG-A10 or CG-A20 chargers. It fits Canon EOS C200, C300 Mark II, C300 Mark III, C500, C500 Mark II, C70, C700, XF605 and XF705 bodies. The battery delivers 14.4 V and 6800 mAh with a four-LED capacity indicator.

Charger replaces single-slot Canon units

The included charger powers two batteries at once through dual D-Tap input or output ports rated at 11 to 16.8 V. An LCD shows charge status with green for ready and red for charging, while built-in MCU protection stops operation on improper voltage, short circuit or overheat. This replaces single-bay Canon CG-A10 or CG-A20 chargers when simultaneous charging is needed.

Battery powers accessories via D-Tap and USB

The battery provides two D-Tap ports for 100 W maximum output and a USB port at 5 V 2.1 A for phones or tablets. It mounts directly to compatible Canon cinema cameras without an adapter plate. Builders who need V-Mount or Gold Mount integration must add a separate adapter, as this kit uses the native BP-A form factor only.

How it compares

Measured against everything we stock in Camera Batteries, Grips & Chargers, at today’s prices. Recalculated every night.

Price $82.99
Pricier than about 90% of the 5,900 comparable items (median $17.99).

Specifications

Product
Brand nameKastar
Model nameBP-A100
Part numberCH-DTAP-1B-BPA100-A
Total capacity98 Wh
Product typeBattery & Charger
Power
Battery chemistryLi-Ion
Size & build
Product dimensions6.5 × 3 × 2 in
In the box
Pack contents1 Charger + 1 Battery

Other versions of this model

5 more in the same range

Questions about this item

What are the physical dimensions of the battery so I can confirm it fits my camera body?

The battery measures 6.5 by 3 by 2 inches and follows the Canon BP-A series form factor used in cameras such as the EOS C70, C200 and C300 Mark III.

How do I connect the charger to power and what is the common mistake to avoid?

Plug a D-Tap source of 11 to 16.8 volts into either D-Tap port on the charger; the common error is using an under-voltage supply that triggers the MCU protection and leaves the battery uncharged.

When will the battery need replacement and what indicates it is time?

Expect replacement when the four-LED indicator no longer shows full capacity after a normal charge cycle or when run-time drops well below the rated 98 Wh.

More in Camera Batteries, Grips & Chargers

Similar items