HitLights LS5050_RGB150NW44K 16.4 ft 150 LED strip light 44 key 60 W 149 lm/ft
- 2 W/Ft
- Strip Light
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Waterproof 5-metre strip with 300 LEDs mixing RGB and warm white for 16 million colours
The KEHIPI 5050 RGBW LED strip light delivers 300 LEDs over 5 metres at 60 LEDs per metre, combining 150 RGB LEDs with 150 warm white LEDs at 2700K to 3000K. It runs on DC12V and is rated IP67 with a 12 mm silicone sheath for indoor or outdoor decoration. No power adapter or controller is included.
The strip uses a fixed 5-pin layout ordered +12V-G-R-B-W, which is not the common RGBW+ or +RGBW arrangement. Controllers and amplifiers must match this exact pin sequence to drive the four channels correctly. Mismatched wiring will prevent proper colour mixing and white output.
Power ranges from 0.1 W per LED for a single colour up to 0.3 W per LED at full RGB mix, giving 3 W to 12 W per metre and 15 W to 60 W total. A DC12V 6 A 72 W supply covers peak load with margin; the strip can be cut every three LEDs and joined in series using the end connectors, though voltage drop may appear on long runs without a signal amplifier.
Measured against everything we stock in LED Bulbs & Strip Lights, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Brand name | BTF-LIGHTING |
The strip contains 150 RGB LEDs and 150 warm-white LEDs at 60 LEDs per metre. Each LED draws 0.1 W for a single colour, 0.2 W for two colours and 0.3 W for three colours, giving a total load of 15 W to 60 W depending on the colours displayed.
The fixed pin order requires a controller that matches +12V, green, red, blue and warm-white channels; it will not work with standard RGB or RGBW+ pinouts. The strip supports 256 grey levels per channel for colour mixing.
The IP67 silicone sheathing is 12 mm wide over a 10 mm FPCB. The strip can be cut between every three LEDs, and 5-pin connectors on both ends allow series linking within the voltage-drop limits of a 12 V supply.
More in LED Bulbs & Strip Lights
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?