We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flexible 10mm LED strip on reel, 5m length, 300 SMDs visible, IP30 non-waterproof finish

KEHIPI

KEHIPI 5050 RGBW LED tape light 5m 60LED/m 150RGB+150 white IP30 DC12V

SKU CH-HDTP-T869B

A 5 m RGBW LED strip with 300 SMD 5050 chips, 150 RGB plus 150 cool-white LEDs at 60 per metre, IP30 indoor rating, and 12 V DC power

  • Key featuresRGB+Pure white, 3 colors in 1 LED+pure white
  • RGBW strip creates 16 million colours with dedicated white LEDs
  • 300 LEDs over 5 m at 60 LEDs per metre
  • Cuttable every three LEDs for custom lengths
  • Five-pin connectors on both ends simplify series wiring
  • Runs on DC 12 V with 15–60 W total power draw

5 m RGBW LED tape with 300 LEDs

This 5 metre strip carries 150 RGB and 150 cool-white 5050 LEDs at 60 per metre on a 10 mm FPCB. It runs on DC12V and draws between 15 W and 60 W depending on the colours lit. The tape is rated IP30 for indoor use and can be cut every three LEDs. Two five-pin connectors allow series connection.

Suits accent lighting that needs true white

Buyers wanting a single strip that mixes 16 million colours plus a pure 6000 K–7000 K white will find the separate white diodes more efficient and cooler than mixed RGB white. The non-waterproof IP30 rating rules out bathrooms, kitchens or any damp location, so outdoor or humid-room projects should look elsewhere.

300 LEDs deliver up to 60 W peak output

At full RGB plus white the strip reaches roughly 60 W, so a 72 W supply is recommended; lighter single-colour use drops draw to about 0.1 W per LED. The 120° viewing angle and 256 grey levels give smooth dimming, but voltage drop appears on runs longer than one reel, requiring an amplifier for extended installations.

How it compares

Measured against everything we stock in LED Bulbs & Strip Lights, at today’s prices. Recalculated every night.

Price $24.99
Typical for this category: the median of 215 items is $25.99.

Specifications

Product
Brand nameBTF-LIGHTING

Questions about this item

What power supply do I need to run the 5 m 60 LED/m RGBW strip at full brightness?

Use a DC 12 V supply rated at least 72 W (6 A). The strip draws 0.1–0.3 W per LED, so the 300 LEDs can consume up to 60 W; the 72 W unit provides headroom.

Can I connect this 5050 RGBW tape to my existing 12 V RGB controller that has only four pins?

No. This strip uses a 5-pin +12 V-G-R-B-W layout; a 4-pin RGB controller lacks the dedicated white channel and will not drive the pure-white LEDs correctly.

How can I verify the cool-white LEDs are emitting at the specified 6000–7000 K after installation?

Power the strip, select the pure-white channel on an RGBW controller, and measure the output with a calibrated color meter; it should read between 6000 K and 7000 K.

More in LED Bulbs & Strip Lights

Similar items